IBM DS3000 manual

Page 35

Move the priority bar between Lowest and Highest and click Next.

The final window, Create Logical Drive Copies – Confirm Copy Settings, reviews the source logical drive, target logical drive and priority settings you have selected. Again, as this will overwrite all existing data on the target logical drive and make the target logical drive read-only, it is important to ensure that these settings are correct.

At the available prompt, type yes and select Finish. The VolumeCopy finishes in a short period of time.

And your VolumeCopy has been created!

DS3000 Storage Manager Software Demo Guide

- 35 -

Image 35

Contents Storage Manager Demo Guide Revision DS3000 Storage Manager Demo GuideOverview Disclaimer Prerequisites Getting StartedAudience Background InformationHttp//w3 Loading the SoftwareExploring the DS3000 Storage Manager Demo Page Tab Bar Screen Views Page Putting Together an Effective Demo Scenarios Initial Setup Tasks dialog boxRename the Storage Subsystem Locate the Disk SystemConfigure Host Access Set a Storage Subsystem passwordAutomatic Simple Configuration Storage SubsystemPage Page Page Logical Drive Creation Select Unconfigured Capacity and click NextPage Page Page Scenario 3 I want to protect against a failed drive Automatic Hot Spare Drive ConfigurationFrom the Configure tab, select Configure Hot Spares Page Expanding Drive Capacity Dynamic Array Expansion Scenario 4 How do I add capacity to an array?Page DS3000 Storage Manager Premium License Features Storage Partitioning Page FlashCopy Logical Drives FlashCopyPage Page Page VolumeCopy Page Page Advanced Features and Manual Functions Manual Hot Spare Configuration Page From the Configure tab, select Create Logical Drives Manual Logical Drive ConfigurationPage Page Page Media Scan Settings Command Line Interface

Related manuals

Manual 38 pages 50.94 Kb

Manual 32 pages 46.59 Kb