IBM DS3000 manual FlashCopy Logical Drives

Page 29

Premium Feature Scenario 2 – “How do I improve my application service levels with hot backups?”

FlashCopy

One significant business problem that the IBM DS3000 Storage Manager solves is the ever-increasing time to complete a backup of today’s applications. As data grows, the time to back it up also grows. The difficulty of provisioning time for backups in a 24x7 environment is challenging for administrators.

The DS3000 Storage Manager’s FlashCopy feature solves this problem by minimizing the amount of time application I/O must be suspended, or the amount of time the application is in hot backup mode.

Instead of impacting the application for the length of the backup process, FlashCopy is used to create a nearly instantaneous image of the source data. Then, the application can come out of hot backup mode and resume normal processing while the backup application begins copying the point-in-time FlashCopy to the desired target.

FlashCopy can be used to create a point-in-time image of any standard logical drive at any time, as long as there are no tasks (such as rebuilds or expansions) in process on that logical drive.

A simple demonstration of the DS3000 Storage Manager’s FlashCopy function will show the benefits of reducing the impact of lengthy backups.

Once the FlashCopy feature is enabled (see page 26), go to the Configure tab and select Create

FlashCopy Logical Drives.

_____________________________________________________________________________

Note: You must refer to the specific instructions in online help for your host OS before creating a FlashCopy. Failure to complete the steps listed for your host OS may result in loss of FlashCopy data consistency. You will also receive a dialog box reminding you of this before you proceed.

_____________________________________________________________________________

DS3000 Storage Manager Software Demo Guide

- 29 -

Image 29
Contents Storage Manager Demo Guide Revision DS3000 Storage Manager Demo GuideOverview Disclaimer Audience Getting StartedBackground Information PrerequisitesHttp//w3 Loading the SoftwareExploring the DS3000 Storage Manager Demo Page Tab Bar Screen Views Page Putting Together an Effective Demo Scenarios Initial Setup Tasks dialog boxRename the Storage Subsystem Locate the Disk SystemConfigure Host Access Set a Storage Subsystem passwordAutomatic Simple Configuration Storage SubsystemPage Page Page Logical Drive Creation Select Unconfigured Capacity and click NextPage Page Page Scenario 3 I want to protect against a failed drive Automatic Hot Spare Drive ConfigurationFrom the Configure tab, select Configure Hot Spares Page Expanding Drive Capacity Dynamic Array Expansion Scenario 4 How do I add capacity to an array?Page DS3000 Storage Manager Premium License Features Storage Partitioning Page FlashCopy Logical Drives FlashCopyPage Page Page VolumeCopy Page Page Advanced Features and Manual Functions Manual Hot Spare Configuration Page From the Configure tab, select Create Logical Drives Manual Logical Drive ConfigurationPage Page Page Media Scan Settings Command Line Interface
Related manuals
Manual 38 pages 50.94 Kb Manual 32 pages 46.59 Kb