7-6. Cleaning Or Replacing Gun Liner
Tools Needed:
Y Disconnect gun from unit.
Head Tube
8 mm
8 mm / 10mm
Remove nozzle, contact tip, adapter, and gas diffuser.
10 mm
Remove liner.
Lay gun cable out straight before installing new liner.
| To Reassemble Gun: | |
| Insert new liner. | |
| Install wire outlet guide so that 1/8 | |
| in (3 mm) of liner sticks out. Hand | |
| tighten outlet guide, and then | |
| tighten two full turns more. | |
| Cut liner off so that 3/4 in (19 mm) | |
Blow out gun casing. | sticks out of head tube. | |
Install gas diffuser, adapter, contact | ||
| ||
| tip, and nozzle. |
Ref. 804