Sears 36749, 36745 warranty Rangecontrol, Display, Tones, Code

Page 10

RANGECONTROL

CANCELS BAKE,

PROGRAM

CLOCK /

 

 

UP ARROW PAD

STATUS

TIMER

TEMPERATURE

FUNCTION

BROIL OR

DISPLAY

DISPLAY

DISPLAY

DISPLAY

{INCREASES TIME

CLEAN OPERATION

\

 

 

 

OR TEMPERATURE)

 

 

 

 

 

 

 

DOWN ARROW

PAD

PRESS TO TURN

SET AUTOMATIC

(OECREASES

TIME

TIMER ON AND OFF

OVEN OPERATIONS

OR TEMPERATURE)

Your range Is controlled with a touch. You now have the ease of setting the following operations:

CLOCK

TIMER

BAKE

DELAY BAKE

BROIL

CLEAN

DELAY

CLEAN

The UP or DOWN arrow Is used to set an amount of time or change thetemperature you want to use. By pressing and holding down either pad the numbering will change

quickly. By pressing and releasing either pad the numbering will change slowly.

DISPLAY:

Once you have programmed your control for any operation, you can display the setting by pressing the appropriate pad. For example, if you are using the TIMER and want to see the time of day, press CLOCK.

The display will show the time of day.

TONES:

The end-of-cycle tone will sound at the end of timer use and automatic oven functions. The end-of-cycle tone is 3 short beeps followed by 1 beep every 6 seconds that repeat unUl you press any operation. TO cancel the end- of-cycle tone, press any key except the UP or DOWN arrow key. If you would like to eliminate the repeating beeps, push and hold CLEAR/OFF for ten seconds. To return the 1 beep every 6 seconds, push and hold CLEAR/OFF for 10 seconds.

F.CODE:

I1the time display beeps continuously and flashes an

"F" followed by a number, you have a function error code. Note the number after the "P', Press CLEAR/

OFF. Allow oven to cool for I hour. If problem repeats, disconnect all power to the range and call for se_lce. Advise your service technician of the number following the "F" in the display.

PRESS

NOTE: You cannot set BAKE, BROIL or COOK TIME while the oven door is in the locked

position. If you try, the word "DOOR" will

appear in the display. The oven door

lock is to be used for Sell-Cleaning only.

9

NCERC18-2

Image 10
Contents Contents KenmoreInjury To Persons ALL RangesCan TIP InstructionsoponalWhat to do if YOU Smell GAS Save These InstructionsNGSAF17 Ously Injured NGSAF18-1 Oven Safety Basic Safety PrecautionsCooktop Safety SELF-CLEAN SafetyCooktop Grease Fire Important SafetyRead and Understand This Information NOW Oven Fire Do not TRY to Move the PANYour Range Model & Serial Number Plate LocationLeft Right Burner IgnitionCooktdpburners Front RearHome Canning Tips WOK CookingObserve Following Points in Canning Tones RangecontrolDisplay CodeTo Cancel the Timer To SET the TimerTo Reset the Timer To SET the ClockMoisture Oven CookingOvenventarea Oven VentBaking To SET BakeRoasting General Roasting InstructionsTo SET Broil Positioning Broiler PANBroiling Broiling Tips NGBRL11-IHOURS- Normal Clean Time SELF.CLEAN CycleBefore a Clean Cycle To SET a SELF-CLEAN CycleTo Interrupt a Clean Cycle When a Clean Cycle is FinishedAfter a Clean Cycle To SET a Delayed SELF-CLEAN CycleOven Interior Oven Door Gasket Cleaning TipsDo not Clean Oven RacksRemovable Cooktop Burner Components Part Cleaning MaterialsDOW Some Models Replacing the Oven Light Removable Oven BottomOven SHUT-OFF Valve Electrical Disconnect LockRemovable Oven Racks Removable Oven DoorRemovable Storage Drawer Stop Broil PositionBefore Calling for Service Work Ticking Sound Dont Call for Service Until YOU CheckDoes Not Spark Igniter Persists After Burner LightsDO-IT-YOURSELFOVEN Temperature Adjustment CoolerFull 90-DAY Warranty on Mechanical Adjustments Full ONE Year Warranty Functioning ALL Parts Except GlassFull 30-DAY Warranty On Glass Parts and Finish of Porce Warranty Service Is Available By Contacting