Harbor Freight Tools 90692 Assembly Instructions, To Attach The Tool Rest Base

11.Keep the Lathe Duplicator Attachment dry and its moving parts properly oiled for better and safer performance.

12.WARNING! Some dust created by power sanding, sawing, grinding, drilling, lathe operations, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depend- ing on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equip- ment, such as those dust masks that are specially designed to filter out micro- scopic particles. (California Health & Safety Code 25249.5, et seq.)

ASSEMBLY INSTRUCTIONS

NOTE: For additional references to the parts listed in the following pages, refer to the Assembly Diagram on page 14.

To Attach The Tool Rest Base:

1.Loosen the Tool Rest Handle of the lathe, and slide the Tool Rest Base of the lathe to as near the Headstock of the lathe as possible. (See Figure A.)

2.Loosen the Support Bar Handle of the Model 90265 lathe, and remove the Tool Rest Base of the lathe. (See Figure A.)

HEADSTOCK

MODEL 90265 LATHE

NOT INCLUDED.LOWER VERTICAL SUPPORT BAR

(46)

TOOL REST

HANDLE

TOOL REST BASE

SUPPORT BAR HANDLE

FIGURE A

SKU 90692 PAGE 5