SECTION 1: INTRODUCTION
Grizzly Industrial, Inc. is proud to offer the Model G1067Z Wood Lathe. This lathe is a part of Grizzly’s growing family of fine woodworking machinery. When used according to the guide- lines stated in this manual, you can expect years of
The Model G1067Z is intended for home and
All running parts utilize shielded ball bearings, which require no lubrication for the life of the bearings.
We are also pleased to provide this manual with the Model G1067Z. It was written to guide you through assembly, review safety considerations, and cover general operating procedures. It repre- sents our latest effort to produce the best docu- mentation possible. If you have any criticisms that you feel we should pay attention to in our next printing, please write to us at the Bellingham, WA address at the end of this section.
Most importantly, we stand behind our machines. We have excellent regional service departments at your disposal should the need arise. If you have any service questions or parts requests, please call or write to us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
To comment on this manual write to:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA
To operate this or any power tool safely and effi- ciently, it is essential to become as familiar with it as possible. The time you invest before you begin to use your Model G1067Z will be time well spent.
DO NOT operate this machine until you are completely familiar with the contents of this manual. Serious personal injury may occur.
G1067Z Wood Lathe |