Carrier 50RLP installation instructions Occupancy Schedule OCCPC01

OCCUPIED FROM — This field is used to configure the hour and minute, in military time, that the mode for the PremierLink™ controller will switch to occupied.

Occupied From: Units	Hours:Minutes
Range	00:00 to 24:00
	(Minutes 00 to 59)
Default Value	00:00

OCCUPIED TO — This field is used to configure the hour and minute, in military time, that the mode for the PremierLink controller switches from occupied to unoccupied.

Occupied To:	Units		Hours:Minutes
	Range		00:00 to 24:00
			(Minutes 00 to 59)
	Default Value		24:00
Table 21 — Occupancy Schedule (OCCPC01)
DESCRIPTION			VALUE	NAME
Time Schedule
Manual Override Hours			0 hours	Ovrd
Period 1: Day of Week			00000000	DOW1
Period 1: Occupied from			00:00	Occ1
Period 1: Occupied to			24:00	UnOcc1
Period 2: Day of Week			00000000	DOW2
Period 2: Occupied from			00:00	Occ2
Period 2: Occupied to			24:00	UnOcc2
Period 3: Day of Week			00000000	DOW3
Period 3: Occupied from			00:00	Occ3
Period 3: Occupied to			24:00	UnOcc3
Period 4: Day of Week			00000000	DOW4
Period 4: Occupied from			00:00	Occ4
Period 4: Occupied to			24:00	UnOcc4
Period 5: Day of Week			00000000	DOW5
Period 5: Occupied from			00:00	Occ5
Period 5: Occupied to			24:00	UnOcc5
Period 6: Day of Week			00000000	DOW6
Period 6: Occupied from			00:00	Occ6
Period 6: Occupied to			24:00	UnOcc6
Period 7: Day of Week			00000000	DOW7
Period 7: Occupied from			00:00	Occ7
Period 7: Occupied to			24:00	UnOcc7
Period 8: Day of Week			00000000	DOW8
Period 8: Occupied from			00:00	Occ8
Period 8: Occupied to			24:00	UnOcc8
Push Button Override			LATCHI00	Name*
Thermostat Override		TEMP_I00		Name*
Time Delay			5 min	Value*
Timed Override Duration			5 min	Value*
Power on Delay			0 sec	PowerUp

*User configured.

Network Time Schedule — The network time schedule allows the occupancy schedule in another device on the CCN to control the Aquazone™ system control panel’s occupancy state.

Each time the occupancy schedule on the controlling device changes to occupied, the controlling device broadcasts an occupancy flag over the CCN. To receive an occupancy flag, a network time created. Up to 18 network time schedules are configured. The schedules are sequentially named OCCPC65E to OCCPC82E, however Service Tool or Building Supervisor software can be used to modify the names up to OCCPC99E.

Holiday Schedules — A Holiday schedule allows the user the capability to specify days of the year (holidays) on which the Aquazone system control panel will follow the holiday time schedule instead of the normal time schedule for that day. Holiday time schedules are normally used to program a weekday in unoccupied mode for the entire day since the building will be empty during a holiday.

There are 16 different holiday schedules that can be created. Holiday schedules can also last more than one day, as long as the days are consecutive.

Holiday schedules must be configured on the time and date broadcaster element on the CCN. If the Comfort Controller on the Aquazone system control panel is the broadcaster, it will send holiday status to all other system elements on the CCN. If the Comfort Controller is not the broadcaster, do not configure the holiday schedules for it, as they will not be used.

To configure a holiday schedule, enter a “1” in the Holiday column of the Day of Week point of the Occupancy schedule.

27