Jet Tools JWL-1442VS Headstock Spindle Lock G, Fig, Headstock Spur Center L, Fig

Page 11

G.Headstock Spindle Lock: (G, Fig. 5)

Push in pin to keep the spindle from turning.

CAUTION!

Never press the headstock spindle lock while

the spindle is turning!

H.Headstock On/Off Switch: (H, Fig.5)

Flip the switch up to turn “ON” the lathe. Flip the switch down to turn the lathe “OFF”.

I.Headstock On/Off Switch Key: Remove key (I, Fig. 5) when in the “OFF” position. The switch will not work until key is reinstalled.

J.Headstock Speed Selector: (J, Fig. 5) Place handle directly above the desired RPM speed. Pull handle out and move to the desired speed, see Figure 6.

CAUTION!

Only change speeds while the spindle is

turning!

K.Headstock Faceplate: (K, Fig. 7)

Used for turning bowls. There are a number of screw holes for mounting the workpiece. Thread the faceplate onto the spindle in a clockwise direction, and tighten two setscrews. Remove the faceplate by loosening two setscrews. Push in headstock spindle lock and use the provided wrench on faceplate flats.

L.Headstock Spur Center: (L, Fig. 7)

Used for turning between centers. Spindle taper is MT-2. Remove spur center by inserting drift rod through the opposite end of the spindle and knocking spur center out.

M.Headstock Indexing Hole: (M, Fig. 7) Thread indexing pin into the indexing hole making sure that it locates in the spindle hole. There are 12 holes in the spindle 30° apart. Three holes in the headstock casting accept the indexing pin. These holes are 20° apart. The combination of holes will allow you to mark your workpiece for evenly spaced features. See chart on page 32.

CAUTION!

Never start the lathe with the index pin

engaged in the spindle!

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Part Number M-708358 WMH Tool GroupWarranty and Service Page Speed Recommendations Volts Total Length of Cord in Feet Volt OperationDisconnect the machine from the power source Introduction Table of Contents 115V/230V, Prewired Specifications JWL-1442VSAssembly Contents of the Shipping ContainersUnpacking and Clean-Up Headstock Lock Handle E, Fig Stand Legs optional accessoryControls & Features Stand ShelfHeadstock Spur Center L, Fig Headstock Spindle Lock G, FigTailstock Lock Handle P, Fig Lathe ToolsMounting Workpiece Between Centers Roughing Out Stock SelectionParting BeadsCoves CutsMounting Stock Sanding and FinishingFace Plate and Bowl Turning Distortion Face Plate or ChuckWood Selection Checks and CracksTo Shape the Outside of a Bowl Sanding and Finishing a Bowl To Shape the Interior of a BowlChanging the Belt and Bearings Adjusting the Clamping MechanismProblem Possible Cause Solution TroubleshootingBed Assembly Index Part Description Size Qty Headstock Assembly JWL1442-MFC JWL1442-144 Stand Assembly optional accessory JWL-1442VS Safety Guard optional accessory Safety Guard Assembly Tool Basket Parts Breakdown Basket AssemblyWiring Diagram Indexer Positions How to use the chart
Related manuals
Manual 32 pages 31.79 Kb

JWL-1442VS specifications

The Jet Tools JWL-1442VS is a robust wood lathe designed for both novice and experienced woodturners. Known for its versatility and reliability, it has become a go-to choice for many who seek to create intricate designs. This lathe combines advanced technology with user-friendly features, making it suitable for crafting everything from simple spindle work to complex bowls and detailed ornaments.

One of the standout features of the JWL-1442VS is its variable speed control, allowing users to adjust the speed from 40 to 3200 RPM. This range provides the flexibility needed for different turning projects, ensuring optimal performance for both roughing and finishing tasks. The digital readout on the control panel displays the current speed, making it easy for users to monitor and adjust as needed.

Another notable characteristic is its 14-inch swing over the bed and 42 inches between centers. This generous capacity enables woodturners to work with larger pieces of stock while maintaining precision and stability. The sturdy cast iron construction of the lathe adds to its durability, absorbing vibrations and providing a solid base for safe operation.

The JWL-1442VS also features a sliding headstock, which enhances accessibility and allows for outboard turning. This capability is particularly beneficial when working on larger bowls or wide pieces, as it provides additional room and maneuverability. The tailstock features a convenient lockable design that promotes secure positioning and easy adjustments.

In addition to its mechanical advantages, this wood lathe is equipped with Jet's innovative quick-release spindle lock. This feature enables users to quickly change out chucks and accessories, reducing downtime and increasing productivity. The machine’s ease of use is complemented by its user-friendly controls and intuitive design.

Safety is also a priority with the JWL-1442VS, featuring a built-in safety switch that helps prevent accidental starts. This attention to safety ensures that woodturners can focus on their craft without unnecessary concerns.

In conclusion, the Jet Tools JWL-1442VS is a versatile and powerful wood lathe that caters to a wide range of turning needs. With its advanced variable speed control, robust construction, and thoughtful features, it stands out as an excellent choice for anyone looking to elevate their woodturning experience. Whether you are a beginner or a seasoned pro, the JWL-1442VS promises to deliver performance and reliability for countless turning projects.
Top Page Image Contents