Jet Tools JWL-1442VS Sanding and Finishing, Face Plate and Bowl Turning, Mounting Stock

Page 16

Sanding and Finishing

Leaving clean cuts will reduce the amount of sanding required. Begin with a fine sandpaper (120 grit or finer). Coarser sandpaper will leave deep scratches that are difficult to remove, and dull crisp details. Fold the sandpaper into a pad; do not wrap sandpaper around your fingers or the workpiece.

To apply a finish, the workpiece can be left on the lathe. Turn off lathe and use a brush, or cloth to apply the finish. Remove excess finish before restarting lathe. Allow drying and sanding again with 320 or 400 grit sandpaper. Apply additional coats of finish and buff.

Face Plate and Bowl Turning

Face plate turning is normally done on the inboard side of the headstock over the bed see Figure 19. You must pivot the headstock 180° for larger workpieces.

Mounting Stock

Use of a face plate is the most common method for holding a block of wood for turning bowls, and plates.

1.Select stock at least 1/8" to 1/4" larger than the dimension on the desired finished workpiece.

2.True one surface of the workpiece for mounting against the face plate. It is best to leave extra stock against the faceplate that can be cut off when the workpiece is finished.

3.Using the faceplate as a template, mark the location of the mounting holes, and drill pilot holes of the appropriate size. If the mounting screws on the faceplate interfere with the workpiece, a waste block can be mounted to the faceplate and then the waste block mounted to the workpiece by gluing or screwing, see Figure 20.

4.Both waste block and workpiece should have good flat surfaces.

5.Push in on the spindle lock and thread face plate and workpiece onto the spindle. Tighten setscrews in the faceplate when secure.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents WMH Tool Group Part Number M-708358Warranty and Service Page Speed Recommendations Volt Operation Volts Total Length of Cord in FeetDisconnect the machine from the power source Introduction Table of Contents Specifications JWL-1442VS 115V/230V, PrewiredUnpacking and Clean-Up Contents of the Shipping ContainersAssembly Stand Legs optional accessory Controls & FeaturesStand Shelf Headstock Lock Handle E, FigHeadstock Spindle Lock G, Fig Headstock Spur Center L, FigLathe Tools Tailstock Lock Handle P, FigMounting Workpiece Between Centers Stock Selection Roughing OutBeads CovesCuts PartingFace Plate and Bowl Turning Sanding and FinishingMounting Stock Face Plate or Chuck Wood SelectionChecks and Cracks DistortionTo Shape the Outside of a Bowl To Shape the Interior of a Bowl Sanding and Finishing a BowlAdjusting the Clamping Mechanism Changing the Belt and BearingsTroubleshooting Problem Possible Cause SolutionBed Assembly Index Part Description Size Qty Headstock Assembly JWL1442-MFC JWL1442-144 Stand Assembly optional accessory JWL-1442VS Safety Guard optional accessory Safety Guard Assembly Parts Breakdown Basket Assembly Tool BasketWiring Diagram How to use the chart Indexer Positions
Related manuals
Manual 32 pages 31.79 Kb

JWL-1442VS specifications

The Jet Tools JWL-1442VS is a robust wood lathe designed for both novice and experienced woodturners. Known for its versatility and reliability, it has become a go-to choice for many who seek to create intricate designs. This lathe combines advanced technology with user-friendly features, making it suitable for crafting everything from simple spindle work to complex bowls and detailed ornaments.

One of the standout features of the JWL-1442VS is its variable speed control, allowing users to adjust the speed from 40 to 3200 RPM. This range provides the flexibility needed for different turning projects, ensuring optimal performance for both roughing and finishing tasks. The digital readout on the control panel displays the current speed, making it easy for users to monitor and adjust as needed.

Another notable characteristic is its 14-inch swing over the bed and 42 inches between centers. This generous capacity enables woodturners to work with larger pieces of stock while maintaining precision and stability. The sturdy cast iron construction of the lathe adds to its durability, absorbing vibrations and providing a solid base for safe operation.

The JWL-1442VS also features a sliding headstock, which enhances accessibility and allows for outboard turning. This capability is particularly beneficial when working on larger bowls or wide pieces, as it provides additional room and maneuverability. The tailstock features a convenient lockable design that promotes secure positioning and easy adjustments.

In addition to its mechanical advantages, this wood lathe is equipped with Jet's innovative quick-release spindle lock. This feature enables users to quickly change out chucks and accessories, reducing downtime and increasing productivity. The machine’s ease of use is complemented by its user-friendly controls and intuitive design.

Safety is also a priority with the JWL-1442VS, featuring a built-in safety switch that helps prevent accidental starts. This attention to safety ensures that woodturners can focus on their craft without unnecessary concerns.

In conclusion, the Jet Tools JWL-1442VS is a versatile and powerful wood lathe that caters to a wide range of turning needs. With its advanced variable speed control, robust construction, and thoughtful features, it stands out as an excellent choice for anyone looking to elevate their woodturning experience. Whether you are a beginner or a seasoned pro, the JWL-1442VS promises to deliver performance and reliability for countless turning projects.
Top Page Image Contents