Jet Tools JWL-1442VS operating instructions Disconnect the machine from the power source

Page 6

230 Volt Operation

If 230V, single-phase operation is desired, the following instructions must be followed:

1.Disconnect the machine from the power source.

2.This lathe is supplied with four motor leads that are connected for 115V operation, as shown in Figure A. Reconnect these four motor leads for 230V operation, as shown in Figure B.

3.The 115V attachment plug (A), supplied with the lathe, must be replaced with a UL/CSA listed plug suitable for 230V operation (D). Contact your local Authorized Service Center or qualified electrician for proper procedures to install the plug. The lathe must comply with all local and national codes after the 230-volt plug is installed.

4.The lathe with a 230 volt plug should only be connected to an outlet having the same configuration

(D). No adapter is available or should be used with the 230-volt plug.

Important: In all cases (115 or 230 volts), make certain the receptacle in question is properly grounded. If you are not sure, have a registered electrician check the receptacle.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents WMH Tool Group Part Number M-708358Warranty and Service Page Speed Recommendations Volt Operation Volts Total Length of Cord in FeetDisconnect the machine from the power source Introduction Table of Contents Specifications JWL-1442VS 115V/230V, PrewiredContents of the Shipping Containers Unpacking and Clean-UpAssembly Stand Shelf Stand Legs optional accessoryControls & Features Headstock Lock Handle E, FigHeadstock Spindle Lock G, Fig Headstock Spur Center L, FigLathe Tools Tailstock Lock Handle P, FigMounting Workpiece Between Centers Stock Selection Roughing OutCuts BeadsCoves PartingSanding and Finishing Face Plate and Bowl TurningMounting Stock Checks and Cracks Face Plate or ChuckWood Selection DistortionTo Shape the Outside of a Bowl To Shape the Interior of a Bowl Sanding and Finishing a BowlAdjusting the Clamping Mechanism Changing the Belt and BearingsTroubleshooting Problem Possible Cause SolutionBed Assembly Index Part Description Size Qty Headstock Assembly JWL1442-MFC JWL1442-144 Stand Assembly optional accessory JWL-1442VS Safety Guard optional accessory Safety Guard Assembly Parts Breakdown Basket Assembly Tool BasketWiring Diagram How to use the chart Indexer Positions
Related manuals
Manual 32 pages 31.79 Kb

JWL-1442VS specifications

The Jet Tools JWL-1442VS is a robust wood lathe designed for both novice and experienced woodturners. Known for its versatility and reliability, it has become a go-to choice for many who seek to create intricate designs. This lathe combines advanced technology with user-friendly features, making it suitable for crafting everything from simple spindle work to complex bowls and detailed ornaments.

One of the standout features of the JWL-1442VS is its variable speed control, allowing users to adjust the speed from 40 to 3200 RPM. This range provides the flexibility needed for different turning projects, ensuring optimal performance for both roughing and finishing tasks. The digital readout on the control panel displays the current speed, making it easy for users to monitor and adjust as needed.

Another notable characteristic is its 14-inch swing over the bed and 42 inches between centers. This generous capacity enables woodturners to work with larger pieces of stock while maintaining precision and stability. The sturdy cast iron construction of the lathe adds to its durability, absorbing vibrations and providing a solid base for safe operation.

The JWL-1442VS also features a sliding headstock, which enhances accessibility and allows for outboard turning. This capability is particularly beneficial when working on larger bowls or wide pieces, as it provides additional room and maneuverability. The tailstock features a convenient lockable design that promotes secure positioning and easy adjustments.

In addition to its mechanical advantages, this wood lathe is equipped with Jet's innovative quick-release spindle lock. This feature enables users to quickly change out chucks and accessories, reducing downtime and increasing productivity. The machine’s ease of use is complemented by its user-friendly controls and intuitive design.

Safety is also a priority with the JWL-1442VS, featuring a built-in safety switch that helps prevent accidental starts. This attention to safety ensures that woodturners can focus on their craft without unnecessary concerns.

In conclusion, the Jet Tools JWL-1442VS is a versatile and powerful wood lathe that caters to a wide range of turning needs. With its advanced variable speed control, robust construction, and thoughtful features, it stands out as an excellent choice for anyone looking to elevate their woodturning experience. Whether you are a beginner or a seasoned pro, the JWL-1442VS promises to deliver performance and reliability for countless turning projects.
Top Page Image Contents