Jet Tools JWL-1442VS Contents of the Shipping Containers, Unpacking and Clean-Up, Assembly

Page 9

WARNING

Read and understand the entire contents of this manual before attempting assembly or operation!

Failure to comply may cause serious injury!

Contents of the Shipping Containers

1. Lathe

1. Tailstock

1. Headstock

1. Face Plate

1. Tool Rest Body

1. Accessory Package

1.Owner’s Manual and Warranty Card

Accessory Package Box

1.Live Center

1. Spur Center

1. Index Pin

1. Wrench

1. Drift Rod

1. Tool Rest

1. Tool Rest Extension

Unpacking and Clean-Up

1.Remove the shipping container. Do not discard any shipping material until the lathe is set up and running properly.

2.Remove tailstock, tool rest and headstock before lifting; see “Adjusting Clamping Mechanism” on Page 20 on how to remove the tailstock, headstock or tool rest.

3.Remove hex cap bolts from skid bottom and lift the lathe bed, with the help from another person, off the skid and into position.

4.Mount the lathe to a solid workbench or refer to the “Stand Legs (optional assembly)” instructions, on page 10, if you have purchased the stand legs.

5.Clean all rust protected surfaces with a cleaner degreaser. Clean under the headstock, tailstock and tool rest body.

6.Reinstall headstock, tool rest and tailstock unless you are mounting to optional legs.

Assembly

1.Secure tool rest (A, Fig. 1) to tool rest body (B, Fig. 1) by tightening handle (C, Fig. 1). Note: For some turning applications, you may need to assemble the tool rest extension between the tool rest body and tool rest.

708358K Shown with optional legs

Contents of Accessory Package

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Part Number M-708358 WMH Tool GroupWarranty and Service Page Speed Recommendations Volts Total Length of Cord in Feet Volt OperationDisconnect the machine from the power source Introduction Table of Contents 115V/230V, Prewired Specifications JWL-1442VSContents of the Shipping Containers Unpacking and Clean-UpAssembly Controls & Features Stand Legs optional accessoryStand Shelf Headstock Lock Handle E, FigHeadstock Spur Center L, Fig Headstock Spindle Lock G, FigTailstock Lock Handle P, Fig Lathe ToolsMounting Workpiece Between Centers Roughing Out Stock SelectionCoves BeadsCuts PartingSanding and Finishing Face Plate and Bowl TurningMounting Stock Wood Selection Face Plate or ChuckChecks and Cracks DistortionTo Shape the Outside of a Bowl Sanding and Finishing a Bowl To Shape the Interior of a BowlChanging the Belt and Bearings Adjusting the Clamping MechanismProblem Possible Cause Solution TroubleshootingBed Assembly Index Part Description Size Qty Headstock Assembly JWL1442-MFC JWL1442-144 Stand Assembly optional accessory JWL-1442VS Safety Guard optional accessory Safety Guard Assembly Tool Basket Parts Breakdown Basket AssemblyWiring Diagram Indexer Positions How to use the chart
Related manuals
Manual 32 pages 31.79 Kb

JWL-1442VS specifications

The Jet Tools JWL-1442VS is a robust wood lathe designed for both novice and experienced woodturners. Known for its versatility and reliability, it has become a go-to choice for many who seek to create intricate designs. This lathe combines advanced technology with user-friendly features, making it suitable for crafting everything from simple spindle work to complex bowls and detailed ornaments.

One of the standout features of the JWL-1442VS is its variable speed control, allowing users to adjust the speed from 40 to 3200 RPM. This range provides the flexibility needed for different turning projects, ensuring optimal performance for both roughing and finishing tasks. The digital readout on the control panel displays the current speed, making it easy for users to monitor and adjust as needed.

Another notable characteristic is its 14-inch swing over the bed and 42 inches between centers. This generous capacity enables woodturners to work with larger pieces of stock while maintaining precision and stability. The sturdy cast iron construction of the lathe adds to its durability, absorbing vibrations and providing a solid base for safe operation.

The JWL-1442VS also features a sliding headstock, which enhances accessibility and allows for outboard turning. This capability is particularly beneficial when working on larger bowls or wide pieces, as it provides additional room and maneuverability. The tailstock features a convenient lockable design that promotes secure positioning and easy adjustments.

In addition to its mechanical advantages, this wood lathe is equipped with Jet's innovative quick-release spindle lock. This feature enables users to quickly change out chucks and accessories, reducing downtime and increasing productivity. The machine’s ease of use is complemented by its user-friendly controls and intuitive design.

Safety is also a priority with the JWL-1442VS, featuring a built-in safety switch that helps prevent accidental starts. This attention to safety ensures that woodturners can focus on their craft without unnecessary concerns.

In conclusion, the Jet Tools JWL-1442VS is a versatile and powerful wood lathe that caters to a wide range of turning needs. With its advanced variable speed control, robust construction, and thoughtful features, it stands out as an excellent choice for anyone looking to elevate their woodturning experience. Whether you are a beginner or a seasoned pro, the JWL-1442VS promises to deliver performance and reliability for countless turning projects.
Top Page Image Contents