Jet Tools JWL-1442VS operating instructions To Shape the Outside of a Bowl

Page 18

To Shape the Outside of a Bowl

1.Odd shaped burls, crotches and other irregular shaped blanks require special preparation before mounting in a chuck, or onto a faceplate. Remove the bark, if there is any, from what appears to be the center of the top of workpiece.

2.Drive the spur center into the top of the workpiece with a wood mallet.

3.Slip the spur center into the headstock taper and bring the tailstock, with a live center, into position. Lock the tailstock to the bed and advance the spindle in order to seat the cup center into workpiece, see Figure 21. Tighten the quill lock.

4.Position the tool support below the centerline and about 1/4" from the workpiece. Note: For larger outboard turning, an optional outboard turning stand is used to place the tool support, see your JET distributor.

5.Turn the workpiece by hand to ensure proper clearance.

6.Start the lathe at the lowest speed and bring it up to the maximum safe speed for the size of work to be turned, see Figure 6 on page 11. If the machine starts to vibrate, lower the speed until the vibration stops.

7.Rough out the outside of the bowl with the 1/2" deep fluted bowl gouge, holding the tool firmly against your hip. For best control, use your whole body to move the gouge through the workpiece.

8.As the bowl takes shape, work on the bottom (tailstock end) to accommodate attaching a face plate, see Figure 21.

9.Turn a short tenon (about 1/8" long) the size of the hole in the faceplate, see Figure 21. This will allow centering the workpiece when the faceplate is attached. Note: If you plan to use a chuck, turn a tenon of appropriate length and diameter to fit your chuck.

10.Stop the lathe, remove the workpiece and attach the face plate, or chuck.

11.Finish turning the outside of the bowl with 1/2" or 3/8" bowl gouge. Leave additional

material at the base of the bowl for support while turning the interior. This will be removed later.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents WMH Tool Group Part Number M-708358Warranty and Service Page Speed Recommendations Volt Operation Volts Total Length of Cord in FeetDisconnect the machine from the power source Introduction Table of Contents Specifications JWL-1442VS 115V/230V, PrewiredContents of the Shipping Containers Unpacking and Clean-UpAssembly Stand Shelf Stand Legs optional accessoryControls & Features Headstock Lock Handle E, FigHeadstock Spindle Lock G, Fig Headstock Spur Center L, FigLathe Tools Tailstock Lock Handle P, FigMounting Workpiece Between Centers Stock Selection Roughing OutCuts BeadsCoves PartingSanding and Finishing Face Plate and Bowl TurningMounting Stock Checks and Cracks Face Plate or ChuckWood Selection DistortionTo Shape the Outside of a Bowl To Shape the Interior of a Bowl Sanding and Finishing a BowlAdjusting the Clamping Mechanism Changing the Belt and BearingsTroubleshooting Problem Possible Cause SolutionBed Assembly Index Part Description Size Qty Headstock Assembly JWL1442-MFC JWL1442-144 Stand Assembly optional accessory JWL-1442VS Safety Guard optional accessory Safety Guard Assembly Parts Breakdown Basket Assembly Tool BasketWiring Diagram How to use the chart Indexer Positions
Related manuals
Manual 32 pages 31.79 Kb

JWL-1442VS specifications

The Jet Tools JWL-1442VS is a robust wood lathe designed for both novice and experienced woodturners. Known for its versatility and reliability, it has become a go-to choice for many who seek to create intricate designs. This lathe combines advanced technology with user-friendly features, making it suitable for crafting everything from simple spindle work to complex bowls and detailed ornaments.

One of the standout features of the JWL-1442VS is its variable speed control, allowing users to adjust the speed from 40 to 3200 RPM. This range provides the flexibility needed for different turning projects, ensuring optimal performance for both roughing and finishing tasks. The digital readout on the control panel displays the current speed, making it easy for users to monitor and adjust as needed.

Another notable characteristic is its 14-inch swing over the bed and 42 inches between centers. This generous capacity enables woodturners to work with larger pieces of stock while maintaining precision and stability. The sturdy cast iron construction of the lathe adds to its durability, absorbing vibrations and providing a solid base for safe operation.

The JWL-1442VS also features a sliding headstock, which enhances accessibility and allows for outboard turning. This capability is particularly beneficial when working on larger bowls or wide pieces, as it provides additional room and maneuverability. The tailstock features a convenient lockable design that promotes secure positioning and easy adjustments.

In addition to its mechanical advantages, this wood lathe is equipped with Jet's innovative quick-release spindle lock. This feature enables users to quickly change out chucks and accessories, reducing downtime and increasing productivity. The machine’s ease of use is complemented by its user-friendly controls and intuitive design.

Safety is also a priority with the JWL-1442VS, featuring a built-in safety switch that helps prevent accidental starts. This attention to safety ensures that woodturners can focus on their craft without unnecessary concerns.

In conclusion, the Jet Tools JWL-1442VS is a versatile and powerful wood lathe that caters to a wide range of turning needs. With its advanced variable speed control, robust construction, and thoughtful features, it stands out as an excellent choice for anyone looking to elevate their woodturning experience. Whether you are a beginner or a seasoned pro, the JWL-1442VS promises to deliver performance and reliability for countless turning projects.
Top Page Image Contents