Jet Tools JWL-1442VS Headstock Faceplate K, Fig, Headstock Spur Center L, Fig

Page 11

K.Headstock Faceplate: (K, Fig. 7)

Used for turning bowls. There are a number of screw holes for mounting the workpiece. Thread the faceplate onto the spindle in a clockwise direction. Remove the faceplate by pushing in headstock spindle lock and using the provided wrench on faceplate flats.

L.Headstock Spur Center: (L, Fig. 7)

Used for turning between centers. Spindle taper is MT-2. Remove spur center by inserting drift rod through the opposite end of the spindle and knocking spur center out.

M.Headstock Indexing Hole: (M, Fig. 7)

Thread indexing pin into the indexing hole making sure that it locates in the spindle hole. There are 12 holes in the spindle 30° apart. Three holes in the headstock casting accept the indexing pin. These holes are 20° apart. The combination of holes will allow you to mark your workpiece for evenly spaced features. See chart on page 29.

Never start the lathe with the index pin engaged in the spindle!

N.Tool Rest Body Lock Handle: (N, Fig. 8) Locks the tool rest body in position. Unlock handle to position the tool rest in any location along lathe bed. Tighten handle when properly positioned.

O.Tool Rest Lock Handle: (O, Fig. 8)

Locks the tool rest in position. Unlock the handle to position tool rest at a specific angle, or height. Tighten handle when properly positioned.

P.Tailstock Lock Handle: (P, Fig. 9)

Locks the tailstock in position. Unlock handle to position the tool rest in any location along lathe bed. Tighten handle when properly positioned.

Q.Tailstock Quill Lock Handle: (Q, Fig. 9) Locks the tailstock quill in position. Unlock handle to position the quill. Tighten handle when properly positioned.

R.Tailstock Quill Handwheel: (R, Fig. 9) Turn the handwheel to position the quill. The tailstock quill lock handle must be loose to position quill.

S.Tailstock Live Center: (S, Fig. 9)

Used for turning between centers. Quill taper is MT-2. Remove live center by retracting the quill until live center loosens.

Figure 7

Figure 8

Figure 9

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Part No. M-708358 Walter Meier Manufacturing IncMore Information Warranty and ServiceTable of Contents Page Speed Recommendations Introduction Specifications Assembly Shipping ContentsStand Shelf Tool RestVolt Operation Grounding InstructionsHeadstock Spindle Lock G, Fig Controls and FeaturesHeadstock Lock Handle E, Fig Headstock Indexing Pin F, FigTailstock Lock Handle P, Fig Headstock Faceplate K, FigHeadstock Spur Center L, Fig Headstock Indexing Hole M, FigMounting Workpiece Between Centers Lathe ToolsRoughing Out OperationsStock Selection Cuts BeadsParting CovesMounting Stock Sanding and FinishingFace Plate and Bowl Turning Distortion Face Plate or ChuckWood Selection Checks and CracksTo Shape the Outside of a Bowl Sanding and Finishing a Bowl To Shape the Interior of a BowlChanging the Belt and Bearings AdjustmentsAdjusting the Clamping Mechanism Tool Basket Optional AccessoriesSafety Guard Parts TroubleshootingOrdering Replacement Parts Index No Description Size Qty Bed Assembly Parts ListIndex No. Part No Description Size Qty Headstock Assembly Parts ListTS-0081031 Hex Head Bolt 16-18 x 3/4 TS-0720081 Headstock Assembly Stand Assembly Basket Assembly Safety Guard AssemblyWiring Diagram Appendix Indexer Positions How to use the chartPage Page New Sanford Road LaVergne, Tennessee
Related manuals
Manual 32 pages 6.3 Kb

JWL-1442VS specifications

The Jet Tools JWL-1442VS is a robust wood lathe designed for both novice and experienced woodturners. Known for its versatility and reliability, it has become a go-to choice for many who seek to create intricate designs. This lathe combines advanced technology with user-friendly features, making it suitable for crafting everything from simple spindle work to complex bowls and detailed ornaments.

One of the standout features of the JWL-1442VS is its variable speed control, allowing users to adjust the speed from 40 to 3200 RPM. This range provides the flexibility needed for different turning projects, ensuring optimal performance for both roughing and finishing tasks. The digital readout on the control panel displays the current speed, making it easy for users to monitor and adjust as needed.

Another notable characteristic is its 14-inch swing over the bed and 42 inches between centers. This generous capacity enables woodturners to work with larger pieces of stock while maintaining precision and stability. The sturdy cast iron construction of the lathe adds to its durability, absorbing vibrations and providing a solid base for safe operation.

The JWL-1442VS also features a sliding headstock, which enhances accessibility and allows for outboard turning. This capability is particularly beneficial when working on larger bowls or wide pieces, as it provides additional room and maneuverability. The tailstock features a convenient lockable design that promotes secure positioning and easy adjustments.

In addition to its mechanical advantages, this wood lathe is equipped with Jet's innovative quick-release spindle lock. This feature enables users to quickly change out chucks and accessories, reducing downtime and increasing productivity. The machine’s ease of use is complemented by its user-friendly controls and intuitive design.

Safety is also a priority with the JWL-1442VS, featuring a built-in safety switch that helps prevent accidental starts. This attention to safety ensures that woodturners can focus on their craft without unnecessary concerns.

In conclusion, the Jet Tools JWL-1442VS is a versatile and powerful wood lathe that caters to a wide range of turning needs. With its advanced variable speed control, robust construction, and thoughtful features, it stands out as an excellent choice for anyone looking to elevate their woodturning experience. Whether you are a beginner or a seasoned pro, the JWL-1442VS promises to deliver performance and reliability for countless turning projects.
Top Page Image Contents