Jet Tools JWL-1442VS operating instructions Optional Accessories, Safety Guard, Tool Basket

Page 20

Optional Accessories

Safety Guard

The JWL-1442VS Safety Guard is an optional accessory.

Referring to Figure 26:

1.Mount the guard bracket (A) to the headstock with two 3/8” flat washers, two 3/8” lock washers and two 3/8”-16 x 1-1/2” socket head cap screws (B).

2.Attach the guard (C) to the guard bracket by inserting the rod and lifting up on the plunger

(D).

3.There are two detents that will hold the guard in place. One is for turning and the other is for when you need the guard up and out of the way. Simply lift up on the plunger and rotate the guard until the plunger slips into the detent.

Tighten the bushings (E) against the bracket with two setscrews (F).

Tool Basket

Referring to Figure 27:

1.Mount the bracket (A) to the inside of the lathe leg with two 5/16”-18 x 1-1/2” Hex Socket Cap Screws, four 5/16” flat washers and two 5/16” hex nuts (B).

2.The two setscrews, on the bracket should be below the bolts and accessible for adjustment.

3.Place the arm of the tool basket into the bracket and tighten with a 5/16”-18 x 5/8” set screw and a 5/16” hex nut (C). Line up the notch in the arm with the setscrews so the tool basket can pivot.

4.Adjust the set screws on the bracket so that the tool basket swings in a level manner. Tighten the two hex socket cap screws.

Figure 26

Figure 27

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Walter Meier Manufacturing Inc Part No. M-708358Warranty and Service More InformationTable of Contents Page Speed Recommendations Introduction Specifications Shipping Contents AssemblyTool Rest Stand ShelfGrounding Instructions Volt OperationControls and Features Headstock Lock Handle E, FigHeadstock Indexing Pin F, Fig Headstock Spindle Lock G, FigHeadstock Faceplate K, Fig Headstock Spur Center L, FigHeadstock Indexing Hole M, Fig Tailstock Lock Handle P, FigLathe Tools Mounting Workpiece Between CentersRoughing Out OperationsStock Selection Beads PartingCoves CutsMounting Stock Sanding and FinishingFace Plate and Bowl Turning Face Plate or Chuck Wood SelectionChecks and Cracks DistortionTo Shape the Outside of a Bowl To Shape the Interior of a Bowl Sanding and Finishing a BowlChanging the Belt and Bearings AdjustmentsAdjusting the Clamping Mechanism Tool Basket Optional AccessoriesSafety Guard Parts TroubleshootingOrdering Replacement Parts Bed Assembly Parts List Index No Description Size QtyHeadstock Assembly Parts List Index No. Part No Description Size QtyTS-0081031 Hex Head Bolt 16-18 x 3/4 TS-0720081 Headstock Assembly Stand Assembly Safety Guard Assembly Basket AssemblyWiring Diagram How to use the chart Appendix Indexer PositionsPage Page New Sanford Road LaVergne, Tennessee
Related manuals
Manual 32 pages 6.3 Kb

JWL-1442VS specifications

The Jet Tools JWL-1442VS is a robust wood lathe designed for both novice and experienced woodturners. Known for its versatility and reliability, it has become a go-to choice for many who seek to create intricate designs. This lathe combines advanced technology with user-friendly features, making it suitable for crafting everything from simple spindle work to complex bowls and detailed ornaments.

One of the standout features of the JWL-1442VS is its variable speed control, allowing users to adjust the speed from 40 to 3200 RPM. This range provides the flexibility needed for different turning projects, ensuring optimal performance for both roughing and finishing tasks. The digital readout on the control panel displays the current speed, making it easy for users to monitor and adjust as needed.

Another notable characteristic is its 14-inch swing over the bed and 42 inches between centers. This generous capacity enables woodturners to work with larger pieces of stock while maintaining precision and stability. The sturdy cast iron construction of the lathe adds to its durability, absorbing vibrations and providing a solid base for safe operation.

The JWL-1442VS also features a sliding headstock, which enhances accessibility and allows for outboard turning. This capability is particularly beneficial when working on larger bowls or wide pieces, as it provides additional room and maneuverability. The tailstock features a convenient lockable design that promotes secure positioning and easy adjustments.

In addition to its mechanical advantages, this wood lathe is equipped with Jet's innovative quick-release spindle lock. This feature enables users to quickly change out chucks and accessories, reducing downtime and increasing productivity. The machine’s ease of use is complemented by its user-friendly controls and intuitive design.

Safety is also a priority with the JWL-1442VS, featuring a built-in safety switch that helps prevent accidental starts. This attention to safety ensures that woodturners can focus on their craft without unnecessary concerns.

In conclusion, the Jet Tools JWL-1442VS is a versatile and powerful wood lathe that caters to a wide range of turning needs. With its advanced variable speed control, robust construction, and thoughtful features, it stands out as an excellent choice for anyone looking to elevate their woodturning experience. Whether you are a beginner or a seasoned pro, the JWL-1442VS promises to deliver performance and reliability for countless turning projects.
Top Page Image Contents