Jet Tools JPS-10TS operating instructions Features Specifications, 708495K

6.0Features

Figure 1

7.0 Specifications

Model number		...............................................	JPS-10TS
Stock numbers:		(Steel Wings)	(Cast Iron Wings)
Saw Unit only with Steel Wings		708490
Saw Unit only with Cast Iron Wings		....................................................	708491
Saw with 30” Rails/Fence Kit		708492K	708494K
Saw with 52” Rails/Fence Kit & Wood Ext. Table		........................ 708493K	708495K
Motor and electricals:
Motor type	totally enclosed fan cooled, induction, capacitor start, with reset button
Horsepower			1-3/4 HP
Phase			single
Voltage			115/230V (prewired 115V)
Cycle			60Hz
Listed FLA (full load amps)			14/7 A
Starting amps			84 A
Running amps (no load)			4 A
Start capacitor			200MFD, 125VAC
Run capacitor			35μF, 300VAC
Power transfer			v-belt
On/off switch			push button
Motor speed			3450 RPM
Power cord length			6 ft. (183cm)
Power plug installed			yes
Recommended circuit and fuse/breaker size1			20A (115V), or 15A (230V)
Sound emission		80 dB at 30” (762mm) from blade, without load

1 subject to local/national electrical codes.

8