Arbor and blade: |
|
|
|
Blade included |
| 40 Tooth, ATB | |
Blade diameter |
| 10” (254mm) | |
Arbor diameter |
| 5/8” (15.88mm) | |
Arbor speed (RPM) |
| 4000 | |
Arbor lock |
| yes | |
Maximum depth of cut at 90 degrees |
| ||
Maximum depth of cut at 45 degrees |
| ||
Maximum rip to right of blade |
| 30” (52” with wood ext. table) | |
Maximum rip to left of blade |
| 12” (305mm) | |
Dado maximum width |
| 13/16” (20.6mm) | |
Dado maximum diameter |
| 8” (200mm) | |
Blade height per one revolution of handwheel | 3/32” (2.3mm) for 90°; 1/16” (1.7mm) for 45° | ||
Blade tilt |
| left, 0 to 45 deg. | |
Materials: |
|
|
|
Main table |
| ground cast iron | |
Trunnion |
| cast iron | |
Enclosed cabinet |
| steel | |
Legs |
| steel | |
Extension wings |
| steel or cast iron | |
Table: |
|
|
|
Table dimensions |
| 20”L x 27”W (508 x 686mm) | |
Table dimensions with wings |
| 44”L x 27”W (1118 x 686mm) | |
Table area in front of blade at maximum height |
| 10” (259mm) | |
Table height from floor, approximate |
| ||
Miter slot |
| two | |
Edge bevel |
| front | |
Dimensions: |
|
|
|
Stand footprint |
| 29”L x | |
Overall dimensions of shipping carton (basic saw only) | ........................... 30”L x | ||
Overall dimensions, fully assembled, accessories mounted: |
| ||
with 30” rip | 60”L x 40”W x 41”H (1524 x 1016 x 1041mm) | ||
with 52” rip | 82”L x 40”W x 41”H (2083 x 1016 x 1041mm) | ||
Dust collection: |
|
|
|
Dust port outside diameter |
| 4” (100mm) | |
Minimum extraction volume required |
| 350 CFM (18CMM) | |
Weights: |
| (Steel Wings) | (Cast Iron Wings) |
Saw Only (Net/Shipping) | 210/223 lb (95.5/101.5 kg) | ....................250/263 lb (113.9/119.5 kg) | |
Saw assembled with 30” Rail/Fence | 252 lb (114 kg) | .....................................292 lb (132.5 kg) | |
Saw assembled with 52” Rail/Fence | 302 lb (137 kg) | ........................................342 lb (155 kg) | |
The specifications in this manual were current at time of publication, but because of our policy of continuous improvement, Walter Meier (Manufacturing) Inc., reserves the right to change specifications at any time and without prior notice, without incurring obligations.
9