STORAGE
A
C
B
Fig. 47
BLADE CHANGING WRENCH STORAGE
A
B
Fig. 48
You can store the blade changing wrench (A) Fig. 47 in the slot (B) behind the fence (C).
LOCKING CUTTINGHEAD IN THE DOWN POSITION
When transporting the saw, lock the cuttinghead in the down position. Lower the cuttinghead (A) Fig. 48 and push in cuttinghead lock knob (B) until it engages with the hole in the cuttinghead.
REAR SUPPORT/STABILIZER & CARRYING HANDLE
Use the rear support/stabilizer and carrying handle to carry the machine.
Carrying the machine by the switch handle will cause misalignment. Always lift and carry the machine by the base or by the carrying handle (C) Fig. 49.
Keep the rear support fully extended during all cutting operations. Push the rear support in only when storing the machine.
C
Fig. 49
MAINTENANCE
CHANGING THE BLADE
Use only
Do not use
Use only 10″ diameter saw blades that are rated for 5200 RPM or higher and have 5/8″ diameter arbor holes.
Disconnect machine from power source.
17