9.With the blade guard (L) Fig. 31, in the raised position, assemble the saw blade (K) on the saw arbor and tighten securely with two arbor wrenches supplied. See section “CHANGING SAW BLADE.”
10.Use a straight edge (E) to check to see if the saw blade is aligned with the rear of the splitter (G) in Figs. 32 and 33. If alignment is necessary, loosen the bolts (A) Fig. 33, align splitter (G) with the saw blade, and tighten two bolts (A).
11.Lower saw blade and install table insert (P) Fig. 34, in the saw table. IMPORTANT: When installing the table insert, make certain to hold on to the blade guard (L). The insert will automatically release the holding action on the splitter and lower the blade guard when the insert is installed in the table opening.
L
K
Fig. 31
G
E
Fig. 32
G
A
Fig. 33
L
P
Fig. 34
17