Delta 36-465 instruction manual PARTS, Service or Warranty Assistance, Accessories

Page 34

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Two Year Limited New Product Warranty

Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. For all refurbished Delta product, the warranty period is 180 days. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

34

Image 34
Contents Contractor’s Saw General Safety Rules Safety Guidelines DefinitionsImportant Safety Instructions Stay ALERT, Watch What YOU are DOING, Additional Safety Rules for Contractor SAW Properly Support Long or Wide workpiecesMotor Specifications Power ConnectionsGrounding Instructions Extension Cords Volt Minimum Gauge Extension CordFastening Stand to Supporting Surface Unpacking and CleaningFunctional Description ForewordUnpacking and Cleaning Combination Dust Chute Assembling SAW Stand SAW AssemblyAssembling SAW to Stand Assembling Blade Tilting Handwheel Motor AssemblyDisconnect Machine from the Power Source Assembling Motor to Motor Mounting PlateDisconnect Machine from Power Source Assembling Motor Motor Mounting Plate to SAWAssembling Motor PULLEY, Belt Pulley GUARD, and Drive Belt To Motor Mounting PlateConnecting Motor Cord to Switch Assembly Assembling and Aligning Blade Guard and Splitter Assembly Assembling Blade Guard Splitter AssemblyIf alignment is necessary, loosen the two screws Page Extension and Switch Assembly Operating ControlsS C O N N E C T M a C H I N E F R O M Power Source Fence Assembly and AdjustmentsAssembling Guide Rails Assembling RIP Fence To Guide Rails RIP Fence Operation Adjustments Assembling Scale To Guide RailPage Raising and Lowering Blade Operation and AdjustmentsAdjusting 90 Degree and 45 Degree Positive Stops Tilting the BladeChecking Blade Alignment Adjusting Blade AlignmentBlade Alignment Adjusting Blade Tilting Mechanism Backlash AdjustmentsChanging SAW Blade Adjusting Table Insert Miter Gage Operation and AdjustmentCommon Sawing Operations Never USE the Fence AS a CUT-OFF Gage When CROSS-CUTTINGCROSS-CUTTING Ripping Constructing a Push StickAccessory Moulding Cutterhead Using Moulding CutterheadAccessory Dado Head Using Dado HeadPower Tool Institute Constructing a FeatherboardPushstick Constructing a Push StickDust Chute MaintenanceStorage Repositioning Motor For StoragePARTS, Service or Warranty Assistance AccessoriesPage Canadian PORTER-CABLE Delta Service Centers