Delta 36-465 instruction manual Combination Dust Chute

UNPACKING AND CLEANING Continued

		3					1.	Combination Dust Chute/
	1	2	4					Support Panel
							2.	Motor Pulley
							3.	Motor
				5			4.	Pulley Guard
							5.	Drive Belt
							6.	Spring
							7. Pins (2) for Mounting Motor
				7			8.	Motor Mounting Plate
		23					9.	5/16 Lockwashers (4)
				8			10.	5/16 Flat Washers (4)
		6
							11.	5/16-18 x 3/4" Carriage
								Head Screws (4)
	22						12.	5/16″ Hex Nuts (4)
			9				13.	5/16″ Hex Nuts (8)
				11			14.	5/16″ Lockwashers (8)
							15.	5/16″ Flat Washers
			10				16.	5/16-18 x 5/8" Hex Head
		13						Bolts (8)
							17.	Rubber Feet (4)
							18.	#10-32 x 12 Screws (8)
							19.	#10 Keps Nuts (8)
				12			20.	#10-1/2" Sheet Metal
			15					Screws (3)
							21.	Grommet
			14
		16					22.	Front Leg Panel with
		18						WARNING Label
		17					23.	Rear Leg Panel
21	20	19
		Fig. 3
					1.		Rear Guide Rails
				2.			UniRipTM Fence
				3.			Front Guide Rails
				4.			Extension Wing
						5. 7/16" Flat Washers (3) for
							assembling extension wing
				6.			7/16-20 x 3/4" Hex Head
							Bolts (3) for assembling
							extension wing
				7.			3/8-16 x 1" Carriage Head
							Bolts for mounting front
							guide rail (6)
				8.			3/8" Flat Washers (12)
				9.			3/8-16 Hex Nuts (12)
				10.			3/8-16 x 1" Hex Head Cap
							Screws for mounting rear
							guide rail (6)
				11.			Scale
						12. Guide Rail End Caps (2)
						13. Front Rail Adapter Plate
				14.			1/4-20 x 3/8” Socket Head
							Screw (2)
								13

14

Fig. 3A Fig. 3B

9