Delta 36-465 Functional Description, Fastening Stand to Supporting Surface, Foreword

FUNCTIONAL DESCRIPTION

FOREWORD

Delta Model 36-465 is a 10" Contractor’s SawTM designed to give high quality performance with maximum depth of cut 3-1/8" (79mm) at 90° and 2-1/8" (54mm) at 45° for clean cutting of stock within the capacities of the saw. Delta Model 36-465 includes; basic machine, sturdy steel stand, integral dust chute, UniRipTM T-SquareTMfence system, patented Auto-SetTMT-Slot miter gage, heavy duty motor, on/off paddle switch, cast iron table, steel table extension wings, see- thru blade guard with splitter and anti-kickback attachment, convenient up-front blade raising and tilting controls and 10″ blade.

FASTENING STAND TO SUPPORTING SURFACE

IMPORTANT: IF, DURING OPERATION, ANY TENDENCY EXISTS FOR THE SAW TO TIP OVER, SLIDE OR WALK ON THE SUPPORTING SURFACE, THE SAW STAND SHOULD BE SECURED TO THE FLOOR SURFACE. THE RUBBER FEET OF THE STAND FEATURE HOLES WHICH ALLOW EASY MOUNTING WITHOUT REMOVING THE SAW FROM THE STAND.

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax. Fig. 2, illustrates the components of the saw. Fig. 3, illustrates the components of the saw stand. Figs. 3A and 3B, illustrate the components of fence.

NOTICE: THE PHOTO ON THE MANUAL COVER ILLUSTRATES THE CURRENT PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS CONTAINED IN THE MANUAL ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING OR ACCESSORIES AND ARE INTENDED TO ILLUSTRATE TECHNIQUE ONLY.

7