DeWalt DW300 Specific Safety Rules, Safety Warnings for Jig Saws, Power Tool USE and Care

Page 4

English

skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c)Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/ or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4)POWER TOOL USE AND CARE

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5)SERVICE

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

SPECIFIC SAFETY RULES

Safety Warnings for Jig Saws

•Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

•Use clamps or another practical way to secure and support the work piece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page Page Definitions Safety Guidelines General Power Tool Safety WarningsWork Area Safety Electrical SafetySpecific Safety Rules Safety Warnings for Jig SawsPower Tool USE and Care ServiceVoltage Volts Total length of cord in meters m Minutes Assembly and Adjustments Operation Blade Installation FigAdjusting the Shoe for Bevel Cuts Fig Description FIGSwitching On and Off Variable Speed Control FigCutting Action Orbital or Straight Fig LED LightMaintenance Hints for Optimum UseRip/Circle Cutting LubricationCleaning Accessories SpecificationsTroubleshooting Seguridad DEL Área DE Trabajo Definiciones Normas De seguridadSeguridad Eléctrica Seguridad Personal USO Y Mantenimiento DE LA Herramienta EléctricaAdvertencias de seguridad para sierras caladoras Normas Específicas DE SeguridadMantenimiento Ténsion Volts Longitud del cable en metros m Descripción FIG USO PrevistoMontaje Y Ajustes FuncionamientoInstalación de la hoja Fig Ajuste de la zapata para Cortes en bisel FigEncendido y apagado Control de velocidad variable FigAcción de corte Orbital o en línea recta Fig Luz LEDRetire la manga de la zapata Fig Sugerencia para un uso óptimoCortes longitudinales y cortes de círculos Para Aserrar LaminadosMantenimiento LubricaciónLimpieza AccesoriosDetección DE Problemas Regras Gerais de Segurança Definições Diretrizes De SegurançaGuarde Estas Instruções USO E Cuidados DA Ferramenta Precauções de segurança para Serras Tico-Tico Regras DE Segurança EspecíficasReparos Tensão Comprimento do cabo de extensão Volts Em Metros m Descrição fig Montagem E AjustesFuncionamento Instalação da Lâmina FigAjuste a Base para Cortes Inclinados Fig Ligar e DesligarGatilho de velocidade variável Fig Para Definir a Base Para Cortes RetosAção de Corte Orbital ou Reto Fig Luz de LEDCamisa da Base Removível Fig Sugestões ideais de UsoCorte Circular/Veio da madeira ManutençãoLubrificação LimpezaEspecificações Resolução DE Problemas AUG10 DW300 Copyright @ 2010 D Ewalt

DW300 specifications

The DeWalt DW300 is a high-performance reciprocating saw that is specifically designed to tackle a wide variety of cutting applications. Known for its robustness and versatility, the DW300 has become a popular choice among both professionals and DIY enthusiasts. With its compact design and ergonomic features, it allows users to work comfortably in tight spaces and undertake challenging cutting tasks with ease.

One of the standout features of the DW300 is its powerful motor, which delivers an impressive speed of 0-2,700 strokes per minute. This high stroke rate allows for efficient cutting through a variety of materials, including wood, metal, and even drywall, making it an invaluable tool for construction, renovation, and demolition projects. The saw's 1-1/8-inch stroke length ensures fast and aggressive cuts, enhancing overall productivity.

Another significant characteristic of the DeWalt DW300 is its integrated electronic brake. This innovative technology stops the blade almost instantly after releasing the trigger, ensuring increased control and safety during operation. The tool also features an adjustable pivoting shoe, which provides added stability and allows the user to maximize blade life by adjusting the position for different cutting applications.

The DW300 also incorporates a tool-free blade clamp that allows for quick and easy blade changes, eliminating the need for additional tools. This feature is especially beneficial for professionals who require efficiency and speed on the job site. The saw is compatible with both standard and specialty blades, making it a versatile option for various cutting tasks.

Additionally, the design of the DW300 includes an ergonomic handle that provides improved grip and comfort during extended use. The balanced weight distribution reduces user fatigue, making this reciprocating saw an excellent choice for prolonged cutting sessions.

Overall, the DeWalt DW300 is a reliable and feature-rich reciprocating saw that meets the demands of a wide range of applications. With its powerful motor, innovative technologies, and user-friendly design, it stands out as a top choice for professionals and hobbyists alike. Whether you are in need of precise cuts or heavy-duty power, the DW300 is equipped to handle the challenge with performance and efficiency.
Top Page Image Contents