DeWalt DW300 Hints for Optimum Use, Rip/Circle Cutting, Maintenance, Lubrication

Page 9

Hints for Optimum Use

SAWING LAMINATES

As the saw blade cuts on the upward stroke, splintering may occur on the surface closest to the shoe plate.

–Use a fine-tooth saw blade.

–Saw from the back surface of the workpiece.

–To minimize splintering, clamp a piece of scrap wood or hardboard to both sides of the workpiece and saw through this sandwich.

SAWING METAL

–Be aware that sawing metal takes much more time than sawing wood.

–Use a saw blade suitable for sawing metal.

–When cutting thin metal, clamp a piece of scrap wood to the back surface of the workpiece and cut through this sandwich.

–Spread a film of oil along the intended line of cut for easier operation and longer blade life. For cutting aluminum, kerosene is preferred.

Rip/Circle Cutting (Fig. 7, 8)

Ripping and circle cutting

FIG. 7

without a pencil line are

 

easily done with the rip

 

fence / circle guide (not

 

included; available at extra

 

cost).

 

 

 

 

Using the

screw supplied

 

with the accessory guide,

 

position

as

shown

in

 

Figure 7

and

thread

the

K

screw into the shoe to clamp the fence securely.

When

ripping,

position

as

FIG. 8

shown in Figure 7 and slide

 

the rip fence under the

 

screw from either side of the

 

saw. Set the cross bar (J) at

 

desired distance from blade

J

and

tighten screw.

For

 

ripping, the cross bar should

 

be down and against the

 

straight edge

of

the

 

workpiece as shown.

 

 

When circle cutting, adjust rip fence so that distance from blade to hole in fence

arm (K) is at the desired radius and tighten screw. Place saw so that hole in fence arm is over center of circle to be cut (drill hole for blade or cut inward from edge of material to get blade into position). When saw is properly positioned, drive a small nail through hole in fence arm. Using rip fence as a pivot arm, begin cutting circle. For circle cutting, the cross bar should be up, as shown in Figure 8.

MAINTENANCE

Your DEWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of injury, turn unit off and disconnect tool from power source before installing and removing accessories, before making any adjustments or removing/installing attachments or accessories.

Lubrication

Your power tool requires no additional lubrication.

English

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Page Page General Power Tool Safety Warnings Definitions Safety GuidelinesWork Area Safety Electrical SafetySafety Warnings for Jig Saws Specific Safety RulesPower Tool USE and Care ServiceVoltage Volts Total length of cord in meters m Minutes Blade Installation Fig Assembly and Adjustments OperationAdjusting the Shoe for Bevel Cuts Fig Description FIGVariable Speed Control Fig Switching On and OffCutting Action Orbital or Straight Fig LED LightHints for Optimum Use MaintenanceRip/Circle Cutting LubricationSpecifications Cleaning AccessoriesTroubleshooting Definiciones Normas De seguridad Seguridad DEL Área DE TrabajoSeguridad Eléctrica USO Y Mantenimiento DE LA Herramienta Eléctrica Seguridad PersonalNormas Específicas DE Seguridad Advertencias de seguridad para sierras caladorasMantenimiento Ténsion Volts Longitud del cable en metros m USO Previsto Descripción FIGFuncionamiento Montaje Y AjustesInstalación de la hoja Fig Ajuste de la zapata para Cortes en bisel FigControl de velocidad variable Fig Encendido y apagadoAcción de corte Orbital o en línea recta Fig Luz LEDSugerencia para un uso óptimo Retire la manga de la zapata FigCortes longitudinales y cortes de círculos Para Aserrar LaminadosLubricación MantenimientoLimpieza AccesoriosDetección DE Problemas Definições Diretrizes De Segurança Regras Gerais de SegurançaGuarde Estas Instruções USO E Cuidados DA Ferramenta Regras DE Segurança Específicas Precauções de segurança para Serras Tico-TicoReparos Tensão Comprimento do cabo de extensão Volts Em Metros m Montagem E Ajustes Descrição figFuncionamento Instalação da Lâmina FigLigar e Desligar Ajuste a Base para Cortes Inclinados FigGatilho de velocidade variável Fig Para Definir a Base Para Cortes RetosLuz de LED Ação de Corte Orbital ou Reto FigCamisa da Base Removível Fig Sugestões ideais de UsoManutenção Corte Circular/Veio da madeiraLubrificação LimpezaEspecificações Resolução DE Problemas AUG10 DW300 Copyright @ 2010 D Ewalt

DW300 specifications

The DeWalt DW300 is a high-performance reciprocating saw that is specifically designed to tackle a wide variety of cutting applications. Known for its robustness and versatility, the DW300 has become a popular choice among both professionals and DIY enthusiasts. With its compact design and ergonomic features, it allows users to work comfortably in tight spaces and undertake challenging cutting tasks with ease.

One of the standout features of the DW300 is its powerful motor, which delivers an impressive speed of 0-2,700 strokes per minute. This high stroke rate allows for efficient cutting through a variety of materials, including wood, metal, and even drywall, making it an invaluable tool for construction, renovation, and demolition projects. The saw's 1-1/8-inch stroke length ensures fast and aggressive cuts, enhancing overall productivity.

Another significant characteristic of the DeWalt DW300 is its integrated electronic brake. This innovative technology stops the blade almost instantly after releasing the trigger, ensuring increased control and safety during operation. The tool also features an adjustable pivoting shoe, which provides added stability and allows the user to maximize blade life by adjusting the position for different cutting applications.

The DW300 also incorporates a tool-free blade clamp that allows for quick and easy blade changes, eliminating the need for additional tools. This feature is especially beneficial for professionals who require efficiency and speed on the job site. The saw is compatible with both standard and specialty blades, making it a versatile option for various cutting tasks.

Additionally, the design of the DW300 includes an ergonomic handle that provides improved grip and comfort during extended use. The balanced weight distribution reduces user fatigue, making this reciprocating saw an excellent choice for prolonged cutting sessions.

Overall, the DeWalt DW300 is a reliable and feature-rich reciprocating saw that meets the demands of a wide range of applications. With its powerful motor, innovative technologies, and user-friendly design, it stands out as a top choice for professionals and hobbyists alike. Whether you are in need of precise cuts or heavy-duty power, the DW300 is equipped to handle the challenge with performance and efficiency.
Top Page Image Contents