Special Cuts, Maintenance | Black & Decker BT1400 instruction

SPECIAL CUTS

NEVER MAKE ANY CUTS UNLESS THE MATERIAL IS SECURED ON THE TABLE AND AGAINST THE FENCE. Aluminum Cutting (Carbide tipped blade only) Aluminum extrusions such as those used when making aluminum screens and storm windows can easily be cut with your saw using the proper blade designed for non--fer rous metal cutting. Position the material so that you will be cutting the thinnest cross section, as shown inFigure 9. Figure 10illustrates the wrong way to cut these extrusions. Use a wax lubricant when cutting aluminum such as Johnson’s Stick Wax No.140. Apply the stick wax directly to the saw blade before cutting. Never apply stick wax to a moving blade.

The wax, available at most hardware stores and industrial mill supply houses, provides proper lubrication and keeps chips from adhering to the blade.

Be sure to properly secure work. Certain workpieces, due to their size, shape or surface finish, may require the use of a clamp, jig or fixture to prevent movement during the cut. Bowed Material

When cutting bowed material always position it as shown in Figure 11 and never like that shown in Figure 12. Positioning the material incorrectly will cause it to pinch the blade near the completion of the cut.

Cutting Plastic Pipe and other round cross-sectional material

Plastic pipe can be easily cut with your saw. It should be cut just like wood and clamped or held firmly to the fence to keep it from rolling particularly when making angle cuts.

and replacement) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

Trouble Shooting Guide

BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS

TROUBLE! SAW WILL NOT START

WHAT’S WRONG?			WHAT TO DO…
1.	Saw not plugged in		1. Plug in saw
2.	Fuse blown or circuit		2. Replace fuse or reset
	breaker tripped			circuit breaker
3.	Cord damaged		3. Have cord replaced by
				authorized service center
4.	Brushes worn out	4.		See “Brushes” in this
				manual
TROUBLE! SAW MAKES UNSATISFACTORY CUTS
WHAT’S WRONG?			WHAT TO DO…
WHAT’S WRONG?			WHAT TO DO…
1.	Dull blade		1.	Replace blade
2.	Blade mounted		2.	Turn blade around
	backwards
3.	Gum or pitch on blade		3.	Remove blade and
				clean with turpentine
				and coarse steel wool
				or household oven
				cleaner
4.	Incorrect blade for work		4.	Change the blade
	being done

MAINTENANCE

(PERFORM ALL MAINTENANCE WITH MITER SAW UNPLUGGED.)

1.All bearings are sealed. They are lubricated for life and need no further maintenance.

2.Periodically clean all dust and wood chips from around AND UNDER the base and the rotary table. Even though slots are provided to allow debris to pass through, some dust will accumulate.

3.The brushes are designed to give you several years of use. If they ever need replacement follow the instructions in this manual or return the tool to the

nearest service center for repair. Important

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection

TROUBLE! BLADE DOES NOT COME UP TO SPEED

WHAT’S WRONG?		WHAT TO DO…
1.	Extension cord too light	1.	Replace with adequate
	or too long		size cord
2. Low house current		2.	Contact your electric
			company
TROUBLE! MACHINE VIBRATES EXCESSIVELY
WHAT’S WRONG?		WHAT TO DO…
1.	Saw not mounted	1.	Tighten all mounting
	securely		hardware
2.	Stand or bench on	2.	Reposition on flat level
	uneven floor		surface
3.	Damaged saw blade	3.	Replace blade

BT1400 specifications

The Black & Decker BT1400 is a versatile and powerful tool designed to cater to a wide range of woodworking and crafting needs. As part of Black & Decker’s commitment to innovation and reliability, the BT1400 stands out for its efficiency, user-friendly features, and robust build.

One of the main features of the BT1400 is its impressive motor, delivering consistent performance and precise results for various applications. This tool is equipped with a powerful 14-amp motor that provides the torque necessary for cutting through dense materials with ease. The motor’s design ensures minimal vibration, allowing for smoother operation and increased accuracy in cuts.

The BT1400 incorporates advanced technologies that enhance its usability. For instance, it boasts an adjustable speed control, which allows users to select the appropriate speed for their specific task. This feature is particularly useful when working with different materials, as it enables users to achieve optimal cutting results without damaging the workpiece.

Another noteworthy characteristic of the BT1400 is its lightweight yet durable construction. Weighing in at just 10 pounds, it is designed for easy maneuverability, making it ideal for both professionals and DIY enthusiasts. Despite its lightweight nature, the tool is built to withstand rigorous use, ensuring longevity and reliability over time.

Safety is a priority in the design of the BT1400. It features a blade guard that protects users from accidental contact with the blade and ensures that the cutting area remains safe during operation. Additionally, the tool is equipped with non-slip handles that provide a secure grip, further enhancing user safety and control.

The BT1400 also comes with a range of attachments and accessories, including different blade options, which allow users to customize their tool for various tasks. This versatility makes it suitable for a diverse array of projects, from furniture making to detailed craftwork.

In summary, the Black & Decker BT1400 is a powerful, user-friendly, and versatile cutting tool that combines advanced features with robust construction. Its adjustable speed settings, safety mechanisms, and lightweight design make it an excellent choice for anyone looking to tackle woodworking or crafting projects with precision and ease. With the BT1400, users can expect a reliable tool that will meet their cutting needs for years to come.