Zenoah HC510DV manual Working Gear and Clothing,  8 

Page 8

5. For safe operation

exposes the operator to Whitefinger disease. This condition produces numerous burning sensations and interferes with the ability to feel and regulate temperature. Get medical advise at once if you experience these symptoms.

h. Be sure to keep this manual handy so that you may refer to it later whenever any questions arise.

i.Always be sure to include this manual when selling, lending, or otherwise transferring the ownership of this product.

WORKING GEAR AND CLOTHING

a. When using this unit, you should wear proper clothing and protective equipment as follows;

1) Sturdy long pants and sturdy long-sleeved shirt

2) Helmet

3) Anti-dust goggles

4) Anti-dust musk

5) Vibration-proof, non-slip gloves

6) Steel-toed safety boots

7) Ear protectors

b. And you should carry with you things as follows.

1) Attached tools

2) Properly reserved fuel

3) Spare wheel

4) Things to notify your working area ( Rope, warning signs )

WARNING

Never cut any material containing asbestos without using a respirator specifically approved for that purpose.

Some materials throw off dangerous sparks when cut. You should wear non-flammable clothing and gloves free of fuel, oil, or grease under these conditions.

WARNING CONSIDERING HANDLING OF FUEL

1.The engine of the RedMax product is designed to run on a mixed fuel which contains highly flammable gasoline. Never store cans of fuel or

8

Image 8
Contents HC510DV 848-C8X-93A1Page Safety First Contents 4  SpecificationsParts location  5  Symbols on the machine  6  7  Before Using the MachineFor safe operation Working Gear and Clothing  8  9  Operation Safety Precautions  10  11  Maintenance Safety PrecautionAfter Using the SAW Set up SE1Change of Dust Stopper  12 SE2 SE3 SE4 Mounting of Cutter Blade Cutter blade Flange bolt Flange washer aFitting Dust Hose and Dust BAG Dust hose Metal band Dust bag Tying CordWhen using Zenoah genuine oil HOW to MIX FuelFuel  14 Fueling the Unit For Your Engine LIFE, AvoidOperation OP1 OP2 Starting EngineClose  16  17  OP3 OP4Decomp valve Switch OP5Stopping Engine OFFOP6 OP7 Cutting Operation For AN Efficient Cutting OperationFront guide Horizontal Cutting Vertical CuttingMaintenance AIR CleanerAir cleaner cover Top plate Felt filter MA1MA2 MA3Spark Plug NGK BPM8YMA4 MA5  22 Cooling AIR Passage Blade Drive BeltBelt Exchange Disassembling ProcedureMA6 MA7 MA8 MA9 Assembling Procedure  24 FAN Drive Belt Belt Tension Adjustment and Exchange Idler pulley Belt adjustment plate Bolt Tighten SlackenMA14  25 Engine Adjustment MA15 When adjusting, take the following stepsMA15  26  27  Starter Rope Exchange  28 MA19 MA20 MA21 Notch 30  Storage  31  32  Troubleshooting guideCheck Probable Causes Action Parts list  33 Cutter Unit HC510DV S/N 200101 and up  34  35  Power Unit 1 HC510DV S/N 200101 and up  36  37  Power Unit 2 HC510DV S/N 200101 and up  38  39  Carburetor HC510DV S/N 200101 and up  40 Accessories & Tool SET HC510DV S/N 200101 and up  41 Manufacturer’s warranty coverage Limited Warranty RedMax Garantie limitée