Stow CD6CE13H18 Stow Cutter 1 CE SAW- RAISE/LOWER and Depth Stop, Raise/Lower and Depth Stop

STOW CUTTER 1 CE SAW— RAISE/LOWER AND DEPTH STOP

Raise/Lower and Depth Stop

The saw is equipped with a Raise/Lower and Depth Stop Assembly that is supported by the following components. (Figure 13)

1.Adjusting Hand Crank Assembly

2.Raise/Lower Acme Screw

3.JackArm

4.Wheel Base Assembly

5.Jackshaft Pin

6.Lock Positions

Setting the Depth Stop

1.Lift the Adjusting Hand Crank to unlock (disengage) the Depth Stop.

2.Rotate the crank to raise or lower the blade to the desired depth.

3.Lower the crank into one of the lock position holes (Item 6).

	Unlocked
	Position
Locked
Position	1	6
	6
	2

3

5

4

Figure 13. Cutting Depth - Raise/Lower System

PAGE 20 — STOW CUTTER 1 CE — OPERATION MANUAL — REV. #2 (12/20/07)