STOW CUTTER 1 CE SAW — RULES FOR SAFE OPERATION
Saw Transportation Safety
■ DO NOT use the handle bars and/or front pointer as lifting |
points. |
■ ALWAYS use ramps capable of supporting the weight of the |
saw and the operator to load and unload the saw. If the saw |
Machine Operation And Safety Decals
The CUTTER 1 CE saw is equipped with a number of operation and safety decals. (Figure 1) Should any of these decals become unreadable, replacements can be obtained from your dealer.
must be lifted, always use two people. Never attempt to lift |
the saw by yourself. |
■ NEVER attempt to tow the untrailered saw behind a vehicle. |
■ DO NOT use on slopes or on extremely uneven surfaces. |
■ NEVER tip the engine to extreme angles as it may cause oil |
to gravitate into the cylinder head making the engine start |
difficult. |
■ NEVER transport the saw to or from the job site with the |
P/N 35137 |
P/N
7.00 LG
CUTTER
1
P/N
WARNING
TO PREVENT SERIOUS INJURY
DO NOT OPERATE SAW WITHOUT PROPER TRAINING & FULL UNDERSTANDING OF THE OWNERS MANUAL
WHEN OPERATING THIS MACHINE
KEEP ALL
GUARDS IN
PLACE
ALWAYS WEAR SAFETY APPROVED
HEARING
PROTECTION
EYE OR FACE
PROTECTION
HEAD
PROTECTION
RESPIRATOR
SMI MASONRY AND CONCRETE SAW MANUFACTURING INSTITUTE
blade mounted. |
EMERGENCIES
■ ALWAYS know the location |
of the nearest fire |
extinguisher. |
P/N 25867 |
P/N
P/N 35158
■ ALWAYS know the location of the |
nearest first aid kit. |
■ In emergencies always know the location of the |
nearest phone or keep a phone on the job site. |
Also know the phone numbers of the nearest |
ambulance, doctor, and fire department. This |
information will be invaluable in the case of an |
Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are:
Crystallinesilicafrombricks.
Cementandothermasonryproducts.
Arsenicandchromiumfromchemically
treatedlumber.
Your risk from these exposures varies, dependingonhowoftenyoudothistype of work. To reduce your exposure to these chemicals: ALWAYS work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
P/N 20525
CAUTION
When Larger Blade and Guard is Installed, Belt Drive MUST Be Changed to Proper Size. See Owners Manual.
FAILURE TO COMPLY WITH THE C C AH JADV EEE AV EEA OIEJGGVCBVVZ
S.M.I. MASONRY AND CONCRETE SAW MANUFACTURER’S INSTITUTE
P/N
P/N 11092
P/N 36099 (ISO Blue)
P/N 35167
WARNING!WARNING!
| KEEP FEET |
|
| KEEP HANDS |
|
| CLEAR |
|
| CLEAR |
|
P/N | P/N | ||||
emergency. |
MODEL
SERIAL NO.
CONTACT PARTS DEPARTMENT
|
| TATI | O | |
O | ||||
R |
|
|
| N |
P/N 25491 | ||||
|
| TATI | O | |
| O |
| ||
R |
|
| N | |
P/N 25678
P/N
6.00 LG
OW P
DER
C O
ATED
P/N 13118 | P/N 11246 | |
|
Figure 1. CUTTER 1 CE Decals
STOW CUTTER 1 CE — OPERATION MANUAL — REV. #2 (12/20/07) — PAGE 9