Kuhn Rikon 10-110B/E, 10" Cabinet Saw Sliding Table owner manual Table of Contents

Page 4

Table of Contents
Safety Warnings	2 -3
Table Saw Safety Rules	3
Speciﬁcations	4
Contents of Package	5
Unpacking and Checking Contents	5-6
Getting To Know Your Sliding Table	7
Assembly	8-12
Adjustment	12-13
Operation	13-14
Rip Fence Installation	..... 15
Maintenance	..... 15
Troubleshooting	16
Parts Diagram	17
Parts List	18
Warranty	19

Speciﬁcations

	Minimum Table Travel	12”
	Minimum Table Travel	12”

	Maximum Table Travel	49”

	Sliding Table Dimension	51-12” x 9-7/8”

	Miter Fence Length	49-1/4”

	Miter Fence Angles	0-45oForward/Back

	Sliding Carriage Size	18-1/4” x 23-3/4”

4

Image 4

Contents Cabinet Saw Sliding Table Operator Safety Required Reading General Safety WarningsTable Saw Safety Rules Refer to them oftenTable of Contents Content of Package Unpacking and Checking ContentsBox #2 Getting To Know Your Sliding Table Assembly Installing the Swing Arm Extension BarMounting the Swing Arm Bracket Mounting the Sliding TableInstalling the Sliding Table Carriage Carriage Table Support Arm Installation Installing the Sliding Table Miter Fence Adjustment Installing the Sliding Table Locking PinLeveling the Sliding Table to the Saw Leveling the Sliding Table CarriageOperation Slide Table Clearance to Saw BladeLocking knob Locking and Unlocking the Slide TableCross Cutting Cutting Sheet GoodsMiter Cuts Maintenance Rip Fence InstallationFence Bar Placement with Sliding Table Troubleshooting Parts Diagram Parts List Key Description Key Part NoWarranty Year Limited WarrantyFor more information