RedMax SGCZ2450S manual Operation

Page 12

SGCZ2450S

8. Operation

■STARTING ENGINE

WARNING

The cutting head will start rotating upon the engine starts.

1.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start rotating upon starting of the engine.

NOTE

1.When restarting the engine immediately after stopping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

OP1

OP2

(1)

2.Push the primer pump several times until overflown fuel flows out in the clear tube. (OP1)

3.Move the choke lever to the closed position. (OP2)

■STOPPING ENGINE (OP3)

1.Release the throttle lever and run the engine for a half minute.

2.Shift the stop switch to the "STOP" position.

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

(2)

(3)

OP3

(3)

(2)

(1)choke lever

(2)close

(3)open

4.Set the stop switch to the "RUN" position. Place the unit on a flat, firm place. Keep the cutting head clear of everything around it. (OP3)

OP5

 

.04 in

 

(1~2mm)

(1)

■ADJUSTING THROTTLE CABLE

• The normal play is 1 or 2mm when measured at the carburetor side end. Readjust with the cable adjuster as required. (OP5)

(1) cable adjuster

(1)

(a)

 

 

(b)

OP4

 

(1)stop switch

(2)RUN

(3)STOP

(a)lockout lever

(b)throttle trigger

5. Firmly grasp (a) and (b) with left hand,

pull the starter knob quickly until engine

OP6

(1)

■ADJUSTING IDLING SPEED (OP6)

1. When the engine tends stop frequently at idling mode, turn the adjusting screw clockwise.

2. When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

(1) idle adjusting screw

fires. (OP4)

IMPORTANT

•Avoid pulling the rope to its end or returning it by releasing the knob. Such actions can cause starter failures.

NOTE

•Warm up the engine before adjusting the idling speed.

6.Move the choke lever downward to open the choke. And restart engine. (OP2)

7.Allow the engine to warm up for several minutes before starting operation.

US-12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents SGCZ2450S Contents Specifications Parts locationSGCZ2450S Symbols on the machine Emission ControlManufactured For safe operation Using the product Before useStarting the engine Fuel safety MaintenanceTransport StorageDisposal Set up Warranty FuelFuel Gasoline RequirementsHOW to MIX Fuel Recommended Mixing Ratio Gasoline 50 OIL For Your Engine LIFE, AvoidFueling the Unit Operation OP7 HOW to USE OP8 OP9Cutting Work Recommended ApplicationsMaintenance Maintenance ChartMA1 MA2 BladeReplacement Plug is a NGK CMR7H MA8 MA4 AIR FilterMuffler MA5Procedures to be Performed After Every 100 Hours of USE StorageDisposal Troubleshooting guide Case 1. Starting failureCheck Probable Causes Action Manufacturers Warranty Coverage Owners Warranty ResponsibilitiesWarranty Commencement Date What is CoveredEmission Warranty Parts List What is not CoveredHOW to File a Claim Where to GET Warranty Service

SGCZ2450S specifications

The RedMax SGCZ2450S is a powerful and efficient outdoor power equipment option primarily designed for landscape maintenance professionals and homeowners who require heavy-duty performance. This versatile machine primarily functions as a brush cutter, making it ideal for tackling dense brush, tall grass, and overgrown vegetation.

One of the standout features of the SGCZ2450S is its robust engine. It is equipped with a high-performance 24.5cc two-stroke engine that provides exceptional torque and power, allowing users to cut through tough terrain with ease. The engine's design incorporates advanced technologies to ensure lower emissions and improved fuel efficiency, aligning with contemporary environmental standards while delivering the necessary power for demanding tasks.

Another significant characteristic of the SGCZ2450S is its ergonomic design. The machine features a comfortable handle with soft grips, which minimizes vibrations during operation. This design choice reduces user fatigue, enabling longer work periods without discomfort. Additionally, the adjustable handle allows for personalized positioning, further enhancing user comfort and efficiency.

The RedMax SGCZ2450S also excels in versatility. The machine is equipped with a variety of attachments that allow it to perform multiple functions. Users can easily change from a brush cutting blade to a trimmer head, enabling seamless transitions between cutting paths and trimming tasks. This adaptability makes it an invaluable tool for landscapers and garden enthusiasts alike.

One notable technological feature is its Easy Start system, which simplifies the starting process. This system markedly reduces the effort required to start the engine, ensuring that users can get to work quickly without hassle. Furthermore, the machine’s air filter is designed for easy access and maintenance, promoting longevity and consistent performance.

In conclusion, the RedMax SGCZ2450S stands out due to its powerful engine, ergonomic design, and remarkable versatility. With advanced technologies that enhance performance and reduce user fatigue, it represents an excellent choice for anyone in need of a reliable and efficient brush cutter. Whether for extensive landscaping work or routine yard maintenance, the SGCZ2450S delivers quality results across various applications.
Top Page Image Contents