RedMax SGCZ2450S MA4 AIR Filter, Muffler, MA5, Fuel Filter, MA7, Spark Arrester, MA6, Spark Plug

Page 15

SGCZ2450S

9. Maintenance

MA4

 

■ AIR FILTER

 

• The air filter, if clogged, will reduce the

 

 

 

 

engine performance. Check and clean

 

 

the filter element. If the element is

 

 

broken or clogged, replace with a new

 

 

one. (MA4)

 

(1)

(1) air filter

 

 

■MUFFLER

WARNING

• Inspect periodically, the muffler for

U

loose fasteners, any damage or

S

corrosion. If any sign of exhaust leakage is found, stop using the machine and have it repaired

MA5

■FUEL FILTER

•When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage. (MA5)

immediately.

•Note that failing to do so may result in the engine catching on fire.

(1)

(1) fuel filter

MA7

■SPARK ARRESTER

• The muffler is equipped with a spark

arrester to prevent red hot carbon from

flying out of the exhaust outlet.

Periodically inspect and clean as

necessary with a wire brush.

In the State of California it is required

by law (Section 4442 of the California

Public Resources Code) to equip a

MA6

.025 in

0.655mm

■SPARK PLUG

•Starting failure and mis-firing are often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a replacement plug, use the correct type specified by RedMax. (MA6)

•REPLACEMENT PLUG IS A NGK CMR7H.

(1)

MA8

spark arrester when a gas powered tool

is used in any forest covered, brush

covered, or grass covered unimproved

land. (MA7)

(1) spark arrester

■GEARCASE AND CUTTERCASE (MA8)

• Periodically refill the case with grease

(every 25 hours).

IMPORTANT

•Note that using any spark plug other than those designated may result in the engine failing to operate properly or in the engine becoming overheated and damaged.

•To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench.

TIGHTENING TORQUE:

87~104 in-lbs

(9.8~11.8 N.m.)

• Use only lithium based greases.

(1)Screw

(2)Seal washer

(3)Grease: approx. 10cc

(4)Air purge

(5)Bolt

(6)Grease: approx. 5cc

■INTAKE AIR COOLING VENT

WARNING

•Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns.

•When checking the machine to make sure that it is okay before using it, check the area around the muffler and remove any wood chips or leaves which have attached themselves to the machine. Failing

US-15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents SGCZ2450S Contents Specifications Parts locationSGCZ2450S Symbols on the machine Emission ControlManufactured For safe operation Using the product Before useStarting the engine Storage Fuel safetyMaintenance TransportDisposal Set up Gasoline Requirements WarrantyFuel FuelHOW to MIX Fuel Recommended Mixing Ratio Gasoline 50 OIL For Your Engine LIFE, AvoidFueling the Unit Operation Recommended Applications OP7 HOW to USEOP8 OP9 Cutting WorkBlade MaintenanceMaintenance Chart MA1 MA2MA5 Replacement Plug is a NGK CMR7H MA8MA4 AIR Filter MufflerProcedures to be Performed After Every 100 Hours of USE StorageDisposal Troubleshooting guide Case 1. Starting failureCheck Probable Causes Action What is Covered Manufacturers Warranty CoverageOwners Warranty Responsibilities Warranty Commencement DateWhere to GET Warranty Service Emission Warranty Parts ListWhat is not Covered HOW to File a Claim

SGCZ2450S specifications

The RedMax SGCZ2450S is a powerful and efficient outdoor power equipment option primarily designed for landscape maintenance professionals and homeowners who require heavy-duty performance. This versatile machine primarily functions as a brush cutter, making it ideal for tackling dense brush, tall grass, and overgrown vegetation.

One of the standout features of the SGCZ2450S is its robust engine. It is equipped with a high-performance 24.5cc two-stroke engine that provides exceptional torque and power, allowing users to cut through tough terrain with ease. The engine's design incorporates advanced technologies to ensure lower emissions and improved fuel efficiency, aligning with contemporary environmental standards while delivering the necessary power for demanding tasks.

Another significant characteristic of the SGCZ2450S is its ergonomic design. The machine features a comfortable handle with soft grips, which minimizes vibrations during operation. This design choice reduces user fatigue, enabling longer work periods without discomfort. Additionally, the adjustable handle allows for personalized positioning, further enhancing user comfort and efficiency.

The RedMax SGCZ2450S also excels in versatility. The machine is equipped with a variety of attachments that allow it to perform multiple functions. Users can easily change from a brush cutting blade to a trimmer head, enabling seamless transitions between cutting paths and trimming tasks. This adaptability makes it an invaluable tool for landscapers and garden enthusiasts alike.

One notable technological feature is its Easy Start system, which simplifies the starting process. This system markedly reduces the effort required to start the engine, ensuring that users can get to work quickly without hassle. Furthermore, the machine’s air filter is designed for easy access and maintenance, promoting longevity and consistent performance.

In conclusion, the RedMax SGCZ2450S stands out due to its powerful engine, ergonomic design, and remarkable versatility. With advanced technologies that enhance performance and reduce user fatigue, it represents an excellent choice for anyone in need of a reliable and efficient brush cutter. Whether for extensive landscaping work or routine yard maintenance, the SGCZ2450S delivers quality results across various applications.
Top Page Image Contents