RedMax SGCZ2450S manual OP7 HOW to USE, OP8 OP9, Cutting Work, Recommended Applications

Page 13

SGCZ2450S

8. Operation

OP7

■HOW TO USE

•Adjust the front handle to the most comfortable position.

•Start the engine and pull the throttle lever gradually. The blades will start moving as the engine speed goes up.

•To stop the blade motion, simply release the throttle lever. The clutch will disengage and the blades stop moving while the engine keeps idling.

•Move the cutting head as sliding its bottom on the ground. This will help you do the job with less effort.

NOTE

a)Avoid running the engine at full throttle with no load. Continuous no load full throttle operation can cause damage to the engine and the driveshaft.

b)Operation at too slow engine speed can cause abnormal vibration of the machine, resulting in short life of driveshaft and clutch parts. If you felt such vibration, use a higher speed range.

c)Though the blades are made of steel harder than conventional metal blades, continuous cutting in soil will accelerate wear.

OP8

OP9

OP10

OP11

OP12

OP13

■CUTTING WORK

This machine does cutting not by a rotary cutter like conventional trimmers but by a pair of special blades that moves round within a limited angle at a speed of

U

approximately 1/30 of conventional

S

trimmers. This unique mechanism has brought you many benefits as following;

1.Since the blade does not cause grass chips and pebbles to be thrown around, you may use less care about your clothing or surrundings.

2.Should the blade hit a rogid object like stones, trees or steel poles during operation, it does not produce a bounce motion that can cause loss of machine control.

3.Since the blade does not cause cut grass to wrap around the neck, you need not to stop operation to remove such wrappers.

4.What's more, since the whole circle of the blade is available for cutting, you can move the cutting head in all directions and cut grass growing on such place difficult-to-get by conventional trimmers. You can even trim the waterside without splashing water.

WARNING

For your health and to prevent the risk from vibration, refrain from working for a long time at the cold temperature.

RECOMMENDED APPLICATIONS:

•Parking area (OP8)

•Roadside (OP9)

•Road edge (OP10)

•Near fences (OP11)

•Around stones (OP12)

•Among trees (OP13)

•Waterside (OP14)

OP14

US-13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents SGCZ2450S Contents Parts location SpecificationsSGCZ2450S Emission Control Symbols on the machineManufactured For safe operation Before use Using the productStarting the engine Maintenance Fuel safetyTransport StorageDisposal Set up Fuel WarrantyFuel Gasoline RequirementsFor Your Engine LIFE, Avoid HOW to MIX Fuel Recommended Mixing Ratio Gasoline 50 OILFueling the Unit Operation OP8 OP9 OP7 HOW to USECutting Work Recommended ApplicationsMaintenance Chart MaintenanceMA1 MA2 BladeMA4 AIR Filter Replacement Plug is a NGK CMR7H MA8Muffler MA5Storage Procedures to be Performed After Every 100 Hours of USEDisposal Case 1. Starting failure Troubleshooting guideCheck Probable Causes Action Owners Warranty Responsibilities Manufacturers Warranty CoverageWarranty Commencement Date What is CoveredWhat is not Covered Emission Warranty Parts ListHOW to File a Claim Where to GET Warranty Service

SGCZ2450S specifications

The RedMax SGCZ2450S is a powerful and efficient outdoor power equipment option primarily designed for landscape maintenance professionals and homeowners who require heavy-duty performance. This versatile machine primarily functions as a brush cutter, making it ideal for tackling dense brush, tall grass, and overgrown vegetation.

One of the standout features of the SGCZ2450S is its robust engine. It is equipped with a high-performance 24.5cc two-stroke engine that provides exceptional torque and power, allowing users to cut through tough terrain with ease. The engine's design incorporates advanced technologies to ensure lower emissions and improved fuel efficiency, aligning with contemporary environmental standards while delivering the necessary power for demanding tasks.

Another significant characteristic of the SGCZ2450S is its ergonomic design. The machine features a comfortable handle with soft grips, which minimizes vibrations during operation. This design choice reduces user fatigue, enabling longer work periods without discomfort. Additionally, the adjustable handle allows for personalized positioning, further enhancing user comfort and efficiency.

The RedMax SGCZ2450S also excels in versatility. The machine is equipped with a variety of attachments that allow it to perform multiple functions. Users can easily change from a brush cutting blade to a trimmer head, enabling seamless transitions between cutting paths and trimming tasks. This adaptability makes it an invaluable tool for landscapers and garden enthusiasts alike.

One notable technological feature is its Easy Start system, which simplifies the starting process. This system markedly reduces the effort required to start the engine, ensuring that users can get to work quickly without hassle. Furthermore, the machine’s air filter is designed for easy access and maintenance, promoting longevity and consistent performance.

In conclusion, the RedMax SGCZ2450S stands out due to its powerful engine, ergonomic design, and remarkable versatility. With advanced technologies that enhance performance and reduce user fatigue, it represents an excellent choice for anyone in need of a reliable and efficient brush cutter. Whether for extensive landscaping work or routine yard maintenance, the SGCZ2450S delivers quality results across various applications.
Top Page Image Contents