RedMax SGCZ2450S manual For safe operation

Page 5

SGCZ2450S

5. For safe operation

WARNING

A brushcutter or trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operater or others. It is extremely important that you read and understand the contents of this Owner's manual.

Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Always use genuine accessories and parts. Non-authorized modifications and/or accessories or parts can result in serious personal injury or the death of the operator or others.

When planning your work schedule, allow plenty of time to rest. Limit the amount of time over which the product is to be used continuously to somewhere around 30 ~ 40 minutes per session. Also try to keep the total amount of work performed in a single day under 2 hours or less.

If you don’t observe the working time, or working manner (See p5), Repetitive Stress Injury(RSI) could occur.

If you feel discomfort, redness and swelling of your fingers or any other part of your body, see a doctor before getting worse.

Basic safety rules

1.Never operate the product when you are fatigued, ill, or upset, or under the influence of madication that may make you drowsy, or if you are under the influence of alcohol or drugs.

2.Never use the product;

a:When the ground is slippery or when you can't maintain a steady posture.

b:At night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be difficult to gain a clear view of the working area.

c:During rain storms, during lightning storms, at times of strong or gale-force winds, or at any other times when weather conditions might make it unsafe to use the product.

3.Wear the following protective equipments when operating the product.

a:Approved helmet to reduce the risk of falling objects.

b: Approved ear protection to reduce the risk of hearing loss.

c: Approved (ANSI Z87.1.) eye protection and foot protection to reduce the risk of injury associated with thrown objects.

U

d: Face filter mask in dusty conditions to

S

reduce the risk of injury associated with the inhalation of dust.

e:Wear sturdy rubber-soled shoes or shoes with some other form of anti-slip protection to help protect you against falling.

f:Wear thick anti-vibration gloves to reduce the risk of whitefinger disease.

g:Do not wear loose clothing, scarves, neck chains, unconfineed long hair, and like to reduce the risk of injury associated with objects being drawn into air intake and rotating parts.

Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury.

4.The ignition system of your unit produces an electromagnetic field of a very low intensity. This field may interfere with some pacemakers. To reduce the risk of serious or fatal injury, persons with pacemaker should consult their physician and the pacemaker munufacturer before operating this tool.

5.The area within a perimeter of 50 feet (15 meters) of the person using the product should be considered a hazardous area into which no one should enter. If necessary yellow warning rope, warning signs should be placed around the perimeter of the area.

When work is to be performed simultaneously by two or more persons, care should also be taken to constantly look around or otherwise check for the presence and locations of other people working so as to maintain a distance between each person sufficient to ensure safety.

6.Avoid using the product where stable footing and balance are not assured.

7.All product service, other than the items listed in the Owner's Manual, should be performed by competent service personnel.

8.Always shut off the engine before setting it down.

9.Start the engine only in well ventilated areas. Never start or run the engine inside a closed room or building and potentially explosive atmosphere. Exhaust fumes

US-5

Image 5
Contents SGCZ2450S Contents SGCZ2450S SpecificationsParts location Manufactured Symbols on the machineEmission Control For safe operation Starting the engine Using the productBefore use Maintenance Fuel safetyTransport StorageDisposal Set up Fuel WarrantyFuel Gasoline RequirementsFueling the Unit HOW to MIX Fuel Recommended Mixing Ratio Gasoline 50 OILFor Your Engine LIFE, Avoid Operation OP8 OP9 OP7 HOW to USECutting Work Recommended ApplicationsMaintenance Chart MaintenanceMA1 MA2 BladeMA4 AIR Filter Replacement Plug is a NGK CMR7H MA8Muffler MA5Disposal Procedures to be Performed After Every 100 Hours of USEStorage Check Probable Causes Action Troubleshooting guideCase 1. Starting failure Owners Warranty Responsibilities Manufacturers Warranty CoverageWarranty Commencement Date What is CoveredWhat is not Covered Emission Warranty Parts ListHOW to File a Claim Where to GET Warranty Service

SGCZ2450S specifications

The RedMax SGCZ2450S is a powerful and efficient outdoor power equipment option primarily designed for landscape maintenance professionals and homeowners who require heavy-duty performance. This versatile machine primarily functions as a brush cutter, making it ideal for tackling dense brush, tall grass, and overgrown vegetation.

One of the standout features of the SGCZ2450S is its robust engine. It is equipped with a high-performance 24.5cc two-stroke engine that provides exceptional torque and power, allowing users to cut through tough terrain with ease. The engine's design incorporates advanced technologies to ensure lower emissions and improved fuel efficiency, aligning with contemporary environmental standards while delivering the necessary power for demanding tasks.

Another significant characteristic of the SGCZ2450S is its ergonomic design. The machine features a comfortable handle with soft grips, which minimizes vibrations during operation. This design choice reduces user fatigue, enabling longer work periods without discomfort. Additionally, the adjustable handle allows for personalized positioning, further enhancing user comfort and efficiency.

The RedMax SGCZ2450S also excels in versatility. The machine is equipped with a variety of attachments that allow it to perform multiple functions. Users can easily change from a brush cutting blade to a trimmer head, enabling seamless transitions between cutting paths and trimming tasks. This adaptability makes it an invaluable tool for landscapers and garden enthusiasts alike.

One notable technological feature is its Easy Start system, which simplifies the starting process. This system markedly reduces the effort required to start the engine, ensuring that users can get to work quickly without hassle. Furthermore, the machine’s air filter is designed for easy access and maintenance, promoting longevity and consistent performance.

In conclusion, the RedMax SGCZ2450S stands out due to its powerful engine, ergonomic design, and remarkable versatility. With advanced technologies that enhance performance and reduce user fatigue, it represents an excellent choice for anyone in need of a reliable and efficient brush cutter. Whether for extensive landscaping work or routine yard maintenance, the SGCZ2450S delivers quality results across various applications.