|
| Technical Data |
| Technical Data |
|
| dx Roller/Spray System | XR9 Sprayer |
Working pressure range | 0 - 207 bar, 21 MPa (0 - 3,000 psi) | 0 - 207 bar, 21 MPa (0 - 3,000 psi) |
Electric motor | 3.5 AMP (open frame, universal) | 4.5 AMP (permanent magnet DC) |
Operating horsepower | 3/8 | 7/8 |
Maximum delivery (with tip) | 0.91 lpm (0.24 gpm) | 1.44 lpm (0.38 gpm) |
Paint hose | 7.6 m (25 ft) x 1/4 in. | 15.2 m (50 ft) x 1/4 in. |
Maximum tip hole size | 0.38 mm (0.015 in.) | 0.48 mm (0.019 in.) |
Weight, sprayer only | 6 kg (13 lb) |
|
Weight, sprayer, hose & gun | 7.8 kg (17 lb) |
|
Dimensions: |
|
|
Length | 41 cm (16 in.) | 49.5 cm (19.5 in.) |
Width | 46 cm (18 in.) | 48.3 cm (19 in.) |
Height | 53 cm (21 in.) | 101.6 cm (40 in.)* |
|
| *Height with folded handle is 66 cm (26 in.) |
Power cord | 3 wire, 1.0 mm2 x 2.0 m (78 in.) | 3 wire, 1.0 mm2 x2.0 m (78 in.) |
Fluid inlet fitting |
|
|
Fluid outlet fitting | 1/4 npsm external thread | 1/4 npsm external thread |
Inlet screen on suction tube | 450 micron (35 mesh) | 450 micron (35 mesh) |
Wetted parts, pump & hose | stainless steel, brass, | stainless steel, brass, leather, |
| molecular weight polyethylene | |
| (UHMWPE), carbide, nylon, | polyethylene (UHMWPE), carbide, |
| aluminum, PVC, polypropylene, | nylon, aluminum, PVC, |
| fluroelastomer | polypropylene, fluroelastomer |
Wetted parts, gun | aluminum, brass, carbide, nylon, | aluminum, brass, carbide, nylon, |
| plated steel, stainless steel, | plated steel, stainless steel, |
| UHMWPE, zinc | UHMWPE, zinc |
Generator requirement | 1500 Watt minimum | 1500 Watt minimum |
Electrical power requirement | ||
| 10 A | 10 A |
Storage temperature range *❖ | ||
Operating temperature range ✔ | 4° to 46°C (40° to 115°F) | 4° to 46°C (40° to 115°F) |
*When pump is stored with
✔ Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
28 | 309477F |