Haier 232738 specifications Equipment Misuse Hazard

Page 5

WARNING

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

•Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

•Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings.

•Check equipment daily. Repair or replace worn or damaged parts immediately.

•Do not alter or modify equipment.

•Use equipment only for its intended purpose. Call your Graco distributor for information.

•Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

•Do not kink or over bend hose or use hoses to pull equipment.

•Keep children and animals away from work area.

•Comply with all applicable safety regulations.

BURN HAZARD

Equipment surfaces and fluid that’s heated can become very hot during operation. To avoid severe burns, do not touch hot fluid or equipment. Wait until equipment/fluid has cooled completely.

PRESSURIZED ALUMINUM PARTS HAZARD

Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use can cause serious chemical reaction and equipment rupture, and result in death, serious injury, and property damage.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

•Read MSDS’s to know the specific hazards of the fluids you are using.

•Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

•Protective eye wear

•Clothing and respirator as recommended by the fluid and solvent manufacturer

•Gloves

•Hearing protection

309477F

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents US Patent 6,752,067 Europe Patent 1 208 Airless SprayerContents Manual Conventions SpecificationsFire and Explosion Hazard Equipment Misuse Hazard Pressure Relief Procedure Thermal Overload Grounding and Electrical RequirementsGeneral Repair Information Problem Cause Solution Basic TroubleshootingService, page 20. Do not store in water See Motor Does Not Operate,Switch Kit, Control Switch Kit,See Low or Fluctuating Output, Thermal Overload,General Problem Motor Does Not Operate Advanced TroubleshootingSee Control Board Diagnostics, General Problem Circuit Breaker is Tripping OFF General Problem Erratic Motor OperationGrounding and Electrical Requirements, General Problem Low or Fluctuating OutputPrime/Spray Drain Valve Kit, See Control Board Diagnostics, page 19. If Necessary using Pressure Control Switch Kit General Problem No OutputGeneral Problem Excessive Pressure Build Up Kit Number Models/Series Kit Description List of KitsSetup XR9 model only Motor DiagnosticsBoth Models Armature Short Circuit Spin Test XR9 model onlyPump Service Control Board DiagnosticsPump Diagnostics Dx Pressure Roller/Spray System PartsDescription Description QtyDx Pressure Roller/Spray System Model Pressure Roller AssemblyModel 232751, 232752 XR9 Spray SystemXR9 Spray System XR9 Spray System Model 232751, 232752, 232753 Series C XR9 Spray System Labels Dx Roller/Spray System XR9 Sprayer Technical DataFor Graco Canada Customers Graco WarrantyGraco INC. P.O. BOX 1441 MINNEAPOLIS, MN
Top Page Image Contents