Graco PRO Xs4 AA manual Equipment Misuse Hazard

Page 6

Warning

WARNING

Equipment Misuse Hazard

Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result in a serious injury.

•This equipment is for professional use only.

•Read all manuals, tags, and labels before operating the equipment.

•Use the equipment only for its intended purpose. If you are uncertain, call your Graco distrib- utor.

•Do not alter or modify equipment. Use only genuine Graco parts and accessories.

•Check the equipment daily. Repair or replace worn or damaged parts immediately.

•Do not exceed the maximum working pressure of the lowest rated system component. Maxi- mum working fluid pressure of this equipment is 3000 psi (21 MPa, 210 bar).

•Use fluids and solvents that are compatible with the equipment wetted parts. See the Techni- cal Data section of all equipment manuals. Read the fluid and solvent manufacturer ’s warn- ings.

•Route the hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 180°F (82°C) or below -40°F (-40°C).

•Wear hearing protection when operating this equipment.

•Comply with all applicable local, state, and national fire, electrical, and other safety regula- tions.

6

309295

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Instructions Parts List 309295 This manual contains important warnings and informationStandard Model Table of Contents Symbols List of ModelsModel Description Operation Fire, Explosion, and Electric Shock Hazard Fluid Injection Hazard Toxic Fluid HazardEquipment Misuse Hazard Introduction How the Electrostatic AA Spray Gun WorksStandard Gun Gun Overview= on = OFF Smart GunVentilate the Spray Booth InstallationInstall the System Flammable or Toxic Vapor HazardNon-Hazardous Area Hazardous AreaConnect the Air Line Connect the Exhaust TubeElectric Shock Hazard Connect the Fluid Line Select a Spray TipGrounding Check Electrical Grounding Check Gun GroundingCheck Fluid Resistivity Check Fluid ViscosityLow Voltage Adjustment Smart Guns Only OperationMaintenance Flush the Spray GunTi1465a Electrical Tests Test Gun ResistanceTest Power Supply Resistance Test Power Supply ResistanceTest Barrel Resistance Test Barrel ResistanceTroubleshooting Spray Pattern TroubleshootingProblem Cause Solution Gun Operation Troubleshooting Electrical Troubleshooting Pressure Relief Procedure RepairPrepare the Gun for Service Tools NeededTip Guard, Air Cap, Spray Tip, or Seat Housing Replacement Tip Guard, Air Cap, and Spray Tip Replace- mentRepair Electrode Replacement Electrode ReplacementFluid Tube Replacement Fluid Filter RemovalFluid Needle Replacement Spring Cap and SpringsBarrel Installation Barrel RemovalPower Supply Removal and Replacement Power Supply and Turbine AlternatorTurbine Alternator Removal and Replacement Atomizing Air Adjustment Valve Repair Atomizing Air Adjustment ValveAir Valve Repair Air ValveES ON/OFF Valve Repair ES ON/OFF ValveParts Part No 85 kV Electrostatic Gun, Series a itemsRef. No Atomizing Air Adjustment Valve Ref. No AlternatorRef. No ES ON/OFF Valve Description Qty AIR CAPIncluded in Air Seal Repair Kit Adjustment valve 20, and ES ON/OFF valve 53 RefRef. No Alternator Description Qty SWITCH, ES HI/LO Accessories Air Line AccessoriesFluid Line Accessories Gun Accessories Miscellaneous AccessoriesSpray Tip Selection Chart Fan Width at Orifice SizeTechnical Data Category DataGraco Standard Warranty Graco Phone NumbersToll Free

PRO Xs4 AA specifications

The Graco PRO Xs4 AA is an advanced airless paint sprayer known for its superior performance and versatility, making it ideal for professionals and DIY enthusiasts alike. This sprayer is designed to handle a wide range of coatings, including latex, stains, and heavy-bodied materials, providing exceptional finish quality on various surfaces.

One of the standout features of the PRO Xs4 AA is its powerful TrueAirless technology, which ensures a consistent and even spray pattern. This technology allows users to achieve a professional finish without the need for thinning materials, saving time and effort. The sprayer is equipped with a robust 0.75 HP motor, delivering up to 0.40 GPM (gallons per minute) fluid output, making it suitable for medium to large-sized projects.

Another significant characteristic is the PRO Xs4's lightweight design, making it easy to transport and maneuver while working. Weighing only 34 pounds, it is simple to set up and operate, reducing fatigue during extended use. The unit features an adjustable pressure settings system, allowing users to control the flow rate according to their specific job requirements for optimal results.

The Graco PRO Xs4 AA also comes with the innovative Graco BlueLink technology, which provides real-time monitoring and diagnostics through a Bluetooth connection. This feature enables users to track their job performance, receive maintenance reminders, and access operational data directly from their smartphones, enhancing user experience and efficiency.

Additionally, the PRO Xs4 is equipped with a durable 515 spray tip, designed to create a fine finish while minimizing overspray. The inclusion of the FlexLiner bag system allows for quick color changes and easy cleanup, making it a truly user-friendly tool. The sprayer is also compatible with a variety of Graco accessories, allowing for customization and improved efficiency based on project needs.

With a maximum tip size of 0.017 inches, the PRO Xs4 is versatile enough to handle both fine and coarse coatings, making it a great option for a range of applications, from interior walls to exterior surfaces. The Graco PRO Xs4 AA combines cutting-edge technology with ease of use, making it an excellent choice for anyone looking to achieve professional-quality results in their painting projects.
Top Page Image Contents