Setup
Setup
Important
•To increase pump life, turn power off when not spraying.
•Do not allow material to dry inside pump, hoses, gun or spray system.
•To break in new pump run dry for no more than 2 minutes.
4.Connect material hose to gun.
Texture Spraying
1.Connect air hose to
ti8375a
2. Connect user supplied air hose to gun.
ti8534a
3. Open air valve.
ti8528a
ti8705a
5.Install spray nozzle. See Recommended Nozzle Selection Chart, page 10.
ti9774a
To break in new pump run dry fro no more than 2 
minutes.
6. Fill material hopper with 1 gallon of water.
ti8372a
7. Turn power switch (K) ON (leave compressor OFF).
7