Graco 309295N important safety instructions Check Fluid Resistivity, Check Fluid Viscosity

Page 14

Installation

Check Fluid Resistivity

WARNING

Fire, Explosion, and Electric Shock Hazard

Check the fluid resistivity in a non-hazard- ous area only. Resistance Meter 722886 and Probe 722860 are not approved for use in a hazardous area.

Failure to follow this warning could cause fire, explosion, electric shock and result in serious injury and property damage.

Graco Part No. 722886 Resistance Meter and 722860 Probe are available as accessories to check that the resistivity of the fluid being sprayed meets the require- ments of an electrostatic air-assisted spray system.

Follow the instructions included with the meter and probe. Readings of 25 megohms-cm and above provide the best electrostatic results.

Check Fluid Viscosity

To check fluid viscosity you will need:

•a viscosity cup

•a stopwatch.

1.Completely submerge the viscosity cup in the fluid. Lift the cup out quickly, starting the stopwatch as soon as the cup is completely removed.

2.Watch the stream of fluid coming from the bottom of the cup. As soon as there is a break in the stream, shut off the stopwatch.

3.Record the fluid type, elapsed time, and size of the viscosity cup.

4.If the viscosity is too high or too low, contact the material supplier and adjust as necessary.

14

309295N

Page 13 Page 15
Image 14
Page 13 Page 15
Contents II 2 G EEx 0.24mJ Smart Model Important Safety Instructions309295N Table of Contents List of Models Fire, Explosion, and Electric Shock Hazard Equipment Misuse Hazard Skin Injection HazardToxic Fluid Hazard Introduction How the Electrostatic AA Spray Gun WorksSmart Gun Gun OverviewStandard Gun Ventilate the Spray Booth InstallationInstall the System Flammable or Toxic Vapor HazardNon-Hazardous Area Typical Installation Key Hazardous AreaElectric Shock Hazard Connect the Air LineConnect the Exhaust Tube Supply HoseSelect a Spray Tip Connect the Fluid LineFilter the Fluid Grounding Earth ground. See Check Electrical GroundingCheck Electrical Grounding Check Gun GroundingCheck Fluid Resistivity Check Fluid ViscosityOperation Low Voltage Adjustment Smart Guns OnlyLow Voltage Adjustment Maintenance Flush the Spray GunTi1465a Electrical Tests Test Gun ResistanceTest Power Supply Resistance Test Power Supply ResistanceTest Barrel Resistance Test Barrel ResistanceProblem Cause Solution TroubleshootingSpray Pattern Troubleshooting Gun Operation Troubleshooting Electrical Troubleshooting Pressure Relief Procedure RepairPrepare the Gun for Service Tools NeededTip Guard, Air Cap, Spray Tip, or Seat Housing Replacement Tip Guard, Air Cap, and Spray Tip Replace- mentRepair Electrode Replacement Electrode ReplacementFluid Tube Replacement Fluid Filter RemovalFluid Needle Replacement Spring Cap and SpringsBarrel Installation Barrel RemovalPower Supply Removal and Replacement Power Supply and Turbine AlternatorTurbine Alternator Removal and Replacement Atomizing Air Adjustment Valve Repair Atomizing Air Adjustment ValveAir Valve Repair Air ValveES ON/OFF Valve Repair ES ON/OFF ValveParts Part No 85 kV Electrostatic Gun, Series C itemsRef. No ES ON/OFF Valve Ref. No Atomizing Air Adjustment ValveRef. No Alternator Description Qty AIR CAPPlug Adjustment valve 20, and ES ON/OFF valve 53 RefAIR CAP Assembly SWITCH, ES HI/LO Fluid Line Accessories AccessoriesAir Line Accessories Gun Accessories Miscellaneous AccessoriesSpray Tip Selection Chart Fan Width at Orifice SizeTechnical Data Category DataToll Free Graco Standard WarrantyGraco Information

309295N specifications

The Graco 309295N is a versatile and highly efficient airless paint sprayer designed for both professionals and DIY enthusiasts. Renowned for its robust performance, this model is ideal for projects ranging from small touch-ups to large-scale commercial applications. Its user-friendly features and advanced technologies make it an indispensable tool for achieving a flawless finish every time.

One of the standout features of the Graco 309295N is its reliable pump system. This sprayer is equipped with a high-efficiency piston pump that delivers consistent pressure and allows for smooth operation. It can handle a wide variety of materials, including latex and oil-based paints, stains, and sealants, providing exceptional versatility for different projects.

The sprayer boasts an adjustable pressure control, which allows users to customize the spray pattern and flow rate according to their specific needs. This feature is especially useful for achieving detailed work in tight spaces as well as covering larger surfaces, ensuring a professional-looking finish without the need for excessive over-spraying.

The Graco 309295N also incorporates a durable and lightweight design, making it easy to maneuver during use. Its portable nature means that it can easily be transported from one job site to another, ensuring convenience for contractors on the go.

Additionally, the unit features an easy-to-use power flush system that simplifies the cleaning process. By conveniently connecting a garden hose, users can flush out the system after each use, significantly reducing cleanup time and allowing for quick transitions between projects.

This model is also compatible with Graco's range of quality spray tips, offering further customization and flexibility in spray patterns. Users can easily switch out tips to achieve different finishes, whether they require a fine mist for delicate applications or a wider spray for larger areas.

In summary, the Graco 309295N is a powerful airless paint sprayer that combines advanced technology with user-friendly features, making it an excellent choice for anyone looking to tackle painting projects efficiently. Its reliable performance, adjustable pressure settings, ease of cleaning, and compatibility with diverse materials and tips ensures that users can achieve flawless results with every application.
Top Page Image Contents