Graco 309295N Skin Injection Hazard, Toxic Fluid Hazard, Equipment Misuse Hazard

Page 5

Warning

WARNING

Skin Injection Hazard

Spray from the gun, hose leaks, or ruptured components can inject fluid into your body and cause an extremely serious injury, including the need for amputation. Splashing fluid in the eyes or on the skin can also cause serious injury.

•Fluid injected into the skin might look like just a cut, but is a serious injury. Get immediate surgical treatment.

•Do not point the gun at anyone or at any part of the body. Do not put your hand or fingers over the spray tip. Do not stop or deflect fluid leaks with your hand, body, glove, or rag.

•Never spray without the tip guard in place.

•Lock the trigger safety when you stop spraying.

•Follow the Pressure Relief Procedure, page 24, when you stop spraying and before cleaning, checking, or repairing equipment.

•Check the hoses and couplings daily. Replace worn, damaged, or loose parts immediately. Permanently coupled hoses cannot be repaired; replace the entire hose.

•Tighten all fluid connections before each use.

Toxic Fluid Hazard

Hazardous fluids or toxic fumes can cause a serious injury or death if splashed in the eyes or on the skin, swallowed, or inhaled.

•Know the specific hazards of the fluid you are using. Read the fluid manufacturer’s warnings.

•Store hazardous fluid in an approved container. Dispose of the hazardous fluid according to all local, state, and national guidelines.

•Wear appropriate protective clothing, gloves, eyewear, and respirator.

Equipment Misuse Hazard

Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result in a serious injury.

•This equipment is for professional use only.

•Read all manuals, tags, and labels before operating the equipment.

•Use the equipment only for its intended purpose. If you are uncertain, call your Graco distributor.

•Do not alter or modify equipment. Use only genuine Graco parts and accessories.

•Check the equipment daily. Repair or replace worn or damaged parts immediately.

•Do not exceed the maximum working pressure of the lowest rated system component. Maximum working fluid pressure of this equipment is 3000 psi (21 MPa, 210 bar).

•Use fluids and solvents that are compatible with the equipment wetted parts. See the Technical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.

•Route the hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 180°F (82°C) or below -40°F (-40°C).

•Wear hearing protection when operating this equipment.

•Comply with all applicable local, state, and national fire, electrical, and other safety regulations.

309295N

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents II 2 G EEx 0.24mJ Smart Model Important Safety Instructions309295N Table of Contents List of Models Fire, Explosion, and Electric Shock Hazard Equipment Misuse Hazard Skin Injection HazardToxic Fluid Hazard How the Electrostatic AA Spray Gun Works IntroductionSmart Gun Gun OverviewStandard Gun Install the System InstallationVentilate the Spray Booth Flammable or Toxic Vapor HazardHazardous Area Non-Hazardous Area Typical Installation KeyConnect the Exhaust Tube Connect the Air LineElectric Shock Hazard Supply HoseSelect a Spray Tip Connect the Fluid LineFilter the Fluid Earth ground. See Check Electrical Grounding GroundingCheck Gun Grounding Check Electrical GroundingCheck Fluid Viscosity Check Fluid ResistivityOperation Low Voltage Adjustment Smart Guns OnlyLow Voltage Adjustment Flush the Spray Gun MaintenanceTi1465a Test Gun Resistance Electrical TestsTest Power Supply Resistance Test Power Supply ResistanceTest Barrel Resistance Test Barrel ResistanceProblem Cause Solution TroubleshootingSpray Pattern Troubleshooting Gun Operation Troubleshooting Electrical Troubleshooting Repair Pressure Relief ProcedureTools Needed Prepare the Gun for ServiceTip Guard, Air Cap, and Spray Tip Replace- ment Tip Guard, Air Cap, Spray Tip, or Seat Housing ReplacementRepair Electrode Replacement Electrode ReplacementFluid Filter Removal Fluid Tube ReplacementSpring Cap and Springs Fluid Needle ReplacementBarrel Removal Barrel InstallationPower Supply and Turbine Alternator Power Supply Removal and ReplacementTurbine Alternator Removal and Replacement Atomizing Air Adjustment Valve Atomizing Air Adjustment Valve RepairAir Valve Air Valve RepairES ON/OFF Valve ES ON/OFF Valve RepairPart No 85 kV Electrostatic Gun, Series C items PartsRef. No ES ON/OFF Valve Ref. No Atomizing Air Adjustment ValveRef. No Alternator AIR CAP Description QtyPlug 53 Ref Adjustment valve 20, and ES ON/OFF valveAIR CAP Assembly SWITCH, ES HI/LO Fluid Line Accessories AccessoriesAir Line Accessories Miscellaneous Accessories Gun AccessoriesFan Width at Orifice Size Spray Tip Selection ChartCategory Data Technical DataToll Free Graco Standard WarrantyGraco Information

309295N specifications

The Graco 309295N is a versatile and highly efficient airless paint sprayer designed for both professionals and DIY enthusiasts. Renowned for its robust performance, this model is ideal for projects ranging from small touch-ups to large-scale commercial applications. Its user-friendly features and advanced technologies make it an indispensable tool for achieving a flawless finish every time.

One of the standout features of the Graco 309295N is its reliable pump system. This sprayer is equipped with a high-efficiency piston pump that delivers consistent pressure and allows for smooth operation. It can handle a wide variety of materials, including latex and oil-based paints, stains, and sealants, providing exceptional versatility for different projects.

The sprayer boasts an adjustable pressure control, which allows users to customize the spray pattern and flow rate according to their specific needs. This feature is especially useful for achieving detailed work in tight spaces as well as covering larger surfaces, ensuring a professional-looking finish without the need for excessive over-spraying.

The Graco 309295N also incorporates a durable and lightweight design, making it easy to maneuver during use. Its portable nature means that it can easily be transported from one job site to another, ensuring convenience for contractors on the go.

Additionally, the unit features an easy-to-use power flush system that simplifies the cleaning process. By conveniently connecting a garden hose, users can flush out the system after each use, significantly reducing cleanup time and allowing for quick transitions between projects.

This model is also compatible with Graco's range of quality spray tips, offering further customization and flexibility in spray patterns. Users can easily switch out tips to achieve different finishes, whether they require a fine mist for delicate applications or a wider spray for larger areas.

In summary, the Graco 309295N is a powerful airless paint sprayer that combines advanced technology with user-friendly features, making it an excellent choice for anyone looking to tackle painting projects efficiently. Its reliable performance, adjustable pressure settings, ease of cleaning, and compatibility with diverse materials and tips ensures that users can achieve flawless results with every application.
Top Page Image Contents