Graco 309295N important safety instructions Prepare the Gun for Service, Tools Needed

Page 25

Prepare the Gun for Service

WARNING

Electric Shock Hazard

Installing and repairing this equipment requires access to parts that may cause electric shock or other serious injury if the

work is not performed properly. Do not install or ser- vice this equipment unless you are trained and quali- fied.

WARNING

Skin Injection Hazard

To reduce the risk of injury, follow the Pres- sure Relief Procedure on page 24 before checking or repairing any part of the system and whenever you are instructed to relieve the pressure.

NOTE:

•Check all possible remedies in Troubleshooting before disassembling the gun.

•Use a vise with padded jaws to prevent damage to plastic parts.

•Lubricate the power supply o-ring (18a) and the plastic end of the fluid tube (14) with dielectric grease (40).

•Lightly lubricate o-rings and seals with non-silicone grease. Order Part No. 111265 Lubricant. Do not over-lubricate.

Repair

•Only use genuine Graco parts. Do not mix or use parts from other PRO Gun models. Note that the air cap, spray tip, and tip guard for this gun are orange.

•Air Seal Repair Kit 244781 is available. The kit must be purchased separately. Kit parts are marked with an asterisk, for example (6*).

WARNING

Some PRO Xs4 AA Gun replacement parts look sim- ilar to other PRO Gun parts but are not interchange- able! When repairing, do not mix or use other

PRO Gun parts that may look similar, but have different part numbers! Use of parts other than those specified in the PRO Xs4 AA Gun parts lists could alter the grounding continuity of the gun, cause parts to leak or rupture, or cause the gun to malfunc- tion and result in serious injury, fire, explosion, or property damage.

1.Flush the gun, page 16.

2.Relieve the pressure, page 24.

3.Disconnect the gun air and fluid lines.

4.Remove the gun from the worksite. Repair area must be clean.

Tools Needed

•2 mm driver (supplied)

•4 mm driver (supplied)

•Multi-Tool (supplied)

•adjustable wrench

•medium screwdriver

•snap ring pliers

309295N

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents 309295N Important Safety InstructionsII 2 G EEx 0.24mJ Smart Model Table of Contents List of Models Fire, Explosion, and Electric Shock Hazard Toxic Fluid Hazard Skin Injection HazardEquipment Misuse Hazard How the Electrostatic AA Spray Gun Works IntroductionStandard Gun Gun OverviewSmart Gun Install the System InstallationVentilate the Spray Booth Flammable or Toxic Vapor HazardHazardous Area Non-Hazardous Area Typical Installation KeyConnect the Exhaust Tube Connect the Air LineElectric Shock Hazard Supply HoseFilter the Fluid Connect the Fluid LineSelect a Spray Tip Earth ground. See Check Electrical Grounding GroundingCheck Gun Grounding Check Electrical GroundingCheck Fluid Viscosity Check Fluid ResistivityLow Voltage Adjustment Low Voltage Adjustment Smart Guns OnlyOperation Flush the Spray Gun MaintenanceTi1465a Test Gun Resistance Electrical TestsTest Power Supply Resistance Test Power Supply ResistanceTest Barrel Resistance Test Barrel ResistanceSpray Pattern Troubleshooting TroubleshootingProblem Cause Solution Gun Operation Troubleshooting Electrical Troubleshooting Repair Pressure Relief ProcedureTools Needed Prepare the Gun for ServiceTip Guard, Air Cap, and Spray Tip Replace- ment Tip Guard, Air Cap, Spray Tip, or Seat Housing ReplacementRepair Electrode Replacement Electrode ReplacementFluid Filter Removal Fluid Tube ReplacementSpring Cap and Springs Fluid Needle ReplacementBarrel Removal Barrel InstallationPower Supply and Turbine Alternator Power Supply Removal and ReplacementTurbine Alternator Removal and Replacement Atomizing Air Adjustment Valve Atomizing Air Adjustment Valve RepairAir Valve Air Valve RepairES ON/OFF Valve ES ON/OFF Valve RepairPart No 85 kV Electrostatic Gun, Series C items PartsRef. No Alternator Ref. No Atomizing Air Adjustment ValveRef. No ES ON/OFF Valve AIR CAP Description QtyPlug 53 Ref Adjustment valve 20, and ES ON/OFF valveAIR CAP Assembly SWITCH, ES HI/LO Air Line Accessories AccessoriesFluid Line Accessories Miscellaneous Accessories Gun AccessoriesFan Width at Orifice Size Spray Tip Selection ChartCategory Data Technical DataGraco Information Graco Standard WarrantyToll Free

309295N specifications

The Graco 309295N is a versatile and highly efficient airless paint sprayer designed for both professionals and DIY enthusiasts. Renowned for its robust performance, this model is ideal for projects ranging from small touch-ups to large-scale commercial applications. Its user-friendly features and advanced technologies make it an indispensable tool for achieving a flawless finish every time.

One of the standout features of the Graco 309295N is its reliable pump system. This sprayer is equipped with a high-efficiency piston pump that delivers consistent pressure and allows for smooth operation. It can handle a wide variety of materials, including latex and oil-based paints, stains, and sealants, providing exceptional versatility for different projects.

The sprayer boasts an adjustable pressure control, which allows users to customize the spray pattern and flow rate according to their specific needs. This feature is especially useful for achieving detailed work in tight spaces as well as covering larger surfaces, ensuring a professional-looking finish without the need for excessive over-spraying.

The Graco 309295N also incorporates a durable and lightweight design, making it easy to maneuver during use. Its portable nature means that it can easily be transported from one job site to another, ensuring convenience for contractors on the go.

Additionally, the unit features an easy-to-use power flush system that simplifies the cleaning process. By conveniently connecting a garden hose, users can flush out the system after each use, significantly reducing cleanup time and allowing for quick transitions between projects.

This model is also compatible with Graco's range of quality spray tips, offering further customization and flexibility in spray patterns. Users can easily switch out tips to achieve different finishes, whether they require a fine mist for delicate applications or a wider spray for larger areas.

In summary, the Graco 309295N is a powerful airless paint sprayer that combines advanced technology with user-friendly features, making it an excellent choice for anyone looking to tackle painting projects efficiently. Its reliable performance, adjustable pressure settings, ease of cleaning, and compatibility with diverse materials and tips ensures that users can achieve flawless results with every application.
Top Page Image Contents