Graco Inc 240361 Technical Data, Dimensions, Wall Mounting Hole Layout, Category, wall view of

Page 17
Technical Data

Technical Data

 

 

Category

Data

 

 

Maximum fluid working pressure

100 psi (0.7 MPa, 7 bar)

 

 

Maximum incoming air pressure

100 psi (0.7 MPa, 7 bar)

 

 

Maximum operating temperature

120_ F (49_ C)

 

 

Gun

See separate gun instruction manual.

 

 

Pump

See separate pump instruction manual.

 

 

Fluid pressure regulator

See separate fluid pressure regulator instruction manual.

 

 

Air pressure regulators

See separate air pressure regulator instruction manual.

 

 

Wetted parts: fluid hoses for Delta guns

nylon, stainless steel

 

 

Wetted parts: fluid hoses for PRO guns

nylon, nickel-chrome plate

 

 

Wetted parts: other fluid hoses and tubing

nylon, PTFE R

 

 

Wetted parts: fluid fittings

nylon, acetal, 304/316 stainless steel

 

 

Weight (without hoses or gun):

 

 

 

packages with fluid pressure regulator

Approx. 29 lb (13 kg)

 

 

packages with surge tank

Approx. 27 (12 kg)

 

 

Sound data:

 

Sound power level*

 

68 dB(A)

at 70 psi 0.48 MPa, 4.8 bar) and 115 cpm

 

 

 

Sound pressure level

81.5 dB(A)

at 70 psi 0.48 MPa, 4.8 bar) and 115 cpm

 

 

 

*Sound power level was measured per ISO Standard 3744. TeflonR is a registered trademark of the DuPont Corporation.

Dimensions

11.5in.

(292 mm)

Wall Mounting Hole

Layout

9.0 in.

(229 mm)

9.0 in.8182A

(229 mm)

 

 

wall view of

 

 

mounting bracket

5.0 in.

(127 mm)

188–285

6.7 in.

(170 mm)

Four 0.438 in. (11 mm) dia. holes (to mount bracket to wall)

8.0in.

(203 mm)

0654

308-845 15

Image 17
Contents Metal fluid fittings and hose couplings are stainless steel INSTRUCTIONS-PARTS LIST100 psi 0.7 MPa, 7 bar Maximum Fluid Working Pressure 100 psi 0.7 MPa, 7 bar Maximum Air Inlet Pressure308845 1A Instruction Manual - Parts List ChangesImprove pressure control instructions Graco Ref 308845 1B Symbols Table of ContentsWarning Symbol Caution SymbolTOXIC FLUID HAZARD EQUIPMENT MISUSE HAZARDGeneral Information SetupPreparing the Operator Preparing the SiteHose Connections Assembling the Wall-Mount UnitFlush Pump Before First Use GroundingPressure Relief Procedure Using the GunAdjusting Pump and Gun Air Regulators Operationregulated Air Spray package or regulated HVLP package shown Priming the System See FigDelta Spray Flushing the System When to Shut Down the System1. Relieve the pressure 12. Relieve the pressureFront Shield Assembly MaintenanceFront Shield Assembly Orderable Parts Back ShieldWall-Mount Packages with Fluid Pressure Regulators Parts ListGrounding Detail Parts DrawingWall-Mount Packages with Surge Tanks 8089A Fluid Filter Kit Accessory Fluid Filter KitDimensions Technical DataWall Mounting Hole Layout CategoryFOR GRACO CANADA CUSTOMERS Graco Standard WarrantyGraco Phone Number