Graco Inc 240-362, 240-351, 240-352, 8119A, 308-845 manual Equipment Misuse Hazard, Toxic Fluid Hazard

Page 5
EQUIPMENT MISUSE HAZARD

TOXIC FLUID HAZARD WARNING

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result INSTRUCTIONS in a serious injury.

DThis equipment is for professional use only.

DRead all the instruction manuals, tags, and labels before operating the equipment.

DUse the equipment only for its intended purpose. If you are uncertain about usage, call your Graco distributor.

DDo not alter or modify this equipment. Use only genuine Graco parts and accessories.

DCheck the equipment daily. Repair or replace worn or damaged parts immediately.

DDo not exceed the maximum working pressure of the lowest rated system component. This pack- age has a 100 psi (0.7 MPa, 7 bar) maximum working pressure.

DUse fluids that are compatible with the equipment wetted parts. See the Technical Data section of all the equipment manuals. Read the fluid manufacturer’s warnings.

DRoute the hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 180_F (82_C) or below –40_F (–40_C).

DDo not use the hoses to pull equipment.

DDo not move pressurized equipment.

DWear hearing protection when operating this equipment.

DComply with all applicable local, state, and national fire, electrical, and other safety regulations.

TOXIC FLUID HAZARD

Hazardous fluids or toxic fumes can cause a serious injury or death if splashed in the eyes or on the skin, swallowed, or inhaled.

DKnow the specific hazards of the fluid you are using. Read the fluid manufacturer’s warnings.

DStore hazardous fluid in an approved container. Dispose of the hazardous fluid according to all local, state, and national guidelines.

DWear appropriate protective clothing, gloves, eyewear, and respirator.

DIf the pump diaphragm fails, hazardous fluid may be exhausted along with the air.

308-845 3

Image 5
Contents Metal fluid fittings and hose couplings are stainless steel INSTRUCTIONS-PARTS LIST100 psi 0.7 MPa, 7 bar Maximum Fluid Working Pressure 100 psi 0.7 MPa, 7 bar Maximum Air Inlet Pressure308845 1A Instruction Manual - Parts List ChangesImprove pressure control instructions Graco Ref 308845 1B Symbols Table of ContentsWarning Symbol Caution SymbolTOXIC FLUID HAZARD EQUIPMENT MISUSE HAZARDGeneral Information SetupPreparing the Operator Preparing the SiteHose Connections Assembling the Wall-Mount UnitFlush Pump Before First Use GroundingPressure Relief Procedure Using the GunAdjusting Pump and Gun Air Regulators Operationregulated Air Spray package or regulated HVLP package shown Priming the System See FigDelta Spray Flushing the System When to Shut Down the System1. Relieve the pressure 12. Relieve the pressureFront Shield Assembly MaintenanceFront Shield Assembly Orderable Parts Back ShieldWall-Mount Packages with Fluid Pressure Regulators Parts ListGrounding Detail Parts DrawingWall-Mount Packages with Surge Tanks 8089A Fluid Filter Kit Accessory Fluid Filter KitDimensions Technical DataWall Mounting Hole Layout CategoryFOR GRACO CANADA CUSTOMERS Graco Standard WarrantyGraco Phone Number