Graco Inc 308-8452 Table of Contents, Symbols, Warning Symbol, Caution Symbol, Warningarning

Page 4
Table of Contents

Table of Contents

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Parts List and Parts Drawing

240–349 to 240–353 . . . . . . . . . . . . . . . . . . 10

240–361 and 240–363 . . . . . . . . . . . . . . . . 12

Fluid Filter Kit 240–440 . . . . . . . . . . . . . . . . . . . 14

Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Wall Mounting Hole Layout . . . . . . . . . . . . . . . . 15

Graco Standard Warranty . . . . . . . . . . . . . . . . . 16

Graco Phone Number . . . . . . . . . . . . . . . . . . . . . 16

Symbols

Warning Symbol

Symbols WARNINGARNING

This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.

Caution Symbol

Warning Symbol CAUTION

This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the corresponding instructions.

 WARNINGARNING WARNING

PRESSURIZED FLUID HAZARD

Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skin and cause serious injury.

DDo not stop or deflect fluid leaks with your hand, glove, or rag.

DFollow the Pressure Relief Procedure on page 6 before cleaning, checking, or servicing the equipment.

DTighten all fluid connections before each use.

DCheck the hoses, tubes, and couplings daily. Replace parts immediately if worn, damaged, or loose. Permanently coupled hoses cannot be repaired.

FIRE AND EXPLOSION HAZARD

Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition and result in fire or explosion and serious injury.

DGround the equipment, personnel in or close to the spray area, the object being sprayed, and all other electrically conductive objects in the spray area. See Grounding on page 5.

DIf there is any static sparking while using the equipment, stop spraying immediately. Identify and correct the problem.

DProvide fresh air ventilation to avoid the buildup of flammable vapors from the solvent or the fluid being sprayed.

DDo not smoke in the spray area.

DExtinguish all open flames or pilot lights in the spray area.

DDo not turn on or off any light switch in the spray area.

DElectrically disconnect all equipment in the spray area.

DKeep the spray area free of debris, including solvent, rags, and gasoline.

DDo not operate a gasoline engine in the spray area.

2308-845

Image 4
Contents INSTRUCTIONS-PARTS LIST Metal fluid fittings and hose couplings are stainless steel100 psi 0.7 MPa, 7 bar Maximum Fluid Working Pressure 100 psi 0.7 MPa, 7 bar Maximum Air Inlet PressureImprove pressure control instructions Graco Ref Instruction Manual - Parts List Changes308845 1A 308845 1B Table of Contents SymbolsWarning Symbol Caution SymbolEQUIPMENT MISUSE HAZARD TOXIC FLUID HAZARDSetup General InformationPreparing the Operator Preparing the SiteAssembling the Wall-Mount Unit Hose ConnectionsFlush Pump Before First Use GroundingUsing the Gun Pressure Relief ProcedureAdjusting Pump and Gun Air Regulators OperationDelta Spray Priming the System See Figregulated Air Spray package or regulated HVLP package shown When to Shut Down the System Flushing the System1. Relieve the pressure 12. Relieve the pressureMaintenance Front Shield AssemblyFront Shield Assembly Orderable Parts Back ShieldParts List Wall-Mount Packages with Fluid Pressure RegulatorsParts Drawing Grounding DetailWall-Mount Packages with Surge Tanks 8089A Accessory Fluid Filter Kit Fluid Filter KitTechnical Data DimensionsWall Mounting Hole Layout CategoryGraco Phone Number Graco Standard WarrantyFOR GRACO CANADA CUSTOMERS