Isocyanate Hazard
Isocyanate Hazard
Spraying materials containing isocyanates creates potentially harmful mists, vapors, and atomized par- ticulates.
Read material manufacturer’s warnings and material MSDS to know specific hazards and precautions related to isocyanates.
Prevent inhalation of isocyanate mists, vapors, and atomized particulates by providing sufficient ventila- tion in the work area. If sufficient ventilation is not available, a
To prevent contact with isocyanates, appropriate per- sonal protective equipment, including chemically impermeable gloves, boots, aprons, and goggles, is also required for everyone in the work area.
Keep A and B
Components
Separate
CAUTION
To prevent
Grounding
WARNING
Read warnings, page 10.
Check your local electrical code and proportioner man- ual for detailed grounding instructions.
Ground the spray gun through connection to a
Piston Safety Lock
Engage piston safety lock whenever you stop spray- ing, to avoid accidental triggering.
WARNING
Read warnings, page 9.
To engage piston safety lock: push knob in and turn clockwise. When engaged, piston safety lock allows some purge rod movement but shuts off fluid flow and gun cannot spray. To disengage piston safety lock:
TI3850a
push knob in and turn counterclockwise until it pops out.
TI3849a
Loss of Air Pressure
In event of loss of air pressure while gun is triggered, gun will continue to spray. To shut off gun, do one of the following:
•Push hard or hit end of safety lock, to engage piston safety lock.
TI4022a
•Close fluid valves A and B.
TI3837a
12 | 309856P |