SAVE THIS MANUAL
You will need this manual for the safety instructions, assembly and operating instructions and parts list. Put it in a safe, dry place for future reference. Keep your invoice with this manual. Write the invoice number on the inside front cover.
READ ALL INSTRUCTIONS BEFORE OPERATING THE
SPECIFICATIONS
Characteristic | Value | |
Minimum Operating Air Pressure | 33 | PSI |
Maximum Operating Air Pressure | 50 | PSI |
Cup Paint Volume | 7 oz. | |
Hose Size | 3/8” | |
Material Output | 2.8 CFM @ 30 PSI - 4.0 CFM @ 50 PSI | |
Air Inlet | 1/4” NPS | |
SAFETY WARNINGS & CAUTIONS
1.KEEP WORK AREA CLEAN. Cluttered areas invite injuries.
2.KEEP CHILDREN AWAY. All children should be kept away from the work area. Don't let them handle tool.
3.DO NOT OPERATE THE
4.Do not spray near open flames, pilot lights in stoves or heaters, or any other heat source. Most solvents and coatings are highly flammable, particularly when sprayed. Always make sure there is adequate ventilation. Extinguish all cigarettes when painting or cleaning. Industrial applications must follow OSHA requirements.
5.READ ALL INFORMATION CONCERNING COATING PRODUCTS AND CLEANING SOLVENTS. Chlorinated solvents, e.g.
6.MATERIALS USED WHEN PAINTING AND CLEANING MAY BE HARMFUL OR FATAL IF INHALED AND/OR SWALLOWED. Once again, when spraying, always make sure there is adequate ventilation. Use a mask or respirator when painting.
7.CHECK ALL SEALS BEFORE CONNECTING TO AIR SUPPLY. Make sure lid is fully attached to cup, retaining ring is screwed past the first thread, air pressure plug is tightened fully, and air supply tube is firmly attached. Never release the lid while the cup is pressurized.
8.USE EYE PROTECTION. Coatings will cause eye irritation. Wear ANSI approved chemical splash safety goggles. Goggles are available from Harbor Freight Tools.
When cleaning, be especially careful as solvents can be forcibly ejected from fluid and air passages.
REV 09d
SKU 00086 | For technical questions, please call | Page 2 |