Harbor Freight Tools 86 operating instructions Assembly, Before YOU USE Your TOUCH-UP GUN

Page 4

ASSEMBLY

Connect the Spray Unit to the Canister Unit as shown in Figure 1.

BEFORE YOU USE YOUR TOUCH-UP GUN

A coupler is required to connect the Touch-Up Gun to an air compressor. Select the coupler, e.g. ¼” “M” style NPT, etc. that mates with the end of the air hose you are using, and screw

it onto the AIR CONNECTION (#23) located at the end of the Touch-Up Gun’s handle (see Figure 2).

Figure 1 -- Connecting the

Spray Unit and Canister

Figure 2 -- Attaching Air Coupler

SKU 00086

For technical questions, please call 1-800-444-3353.

Page 4

Image 4
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsSpecifications Safety Warnings & CautionsSave this Manual For technical questions, please callUnpacking Assembly Before YOU USE Your TOUCH-UP GUNSetup Adjusting Fan SizeOperation Filling the Paint GunAdjusting Jet Shape Adjusting Paint OutputSpraying Techniques Distance from wallMaintenance General Maintenance  Checking & Replacing the NeedleCleaning Lubrication Lubricating the Touch-Up GunPreventative Maintenance SKU For technical questions, please callParts List Description QTYMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800 Record Product’s Serial Number Here