Lubrication, Lubricating the Touch-Up Gun

Lubrication:

Before and after each use of the Touch-Up Gun, perform the following lubrication process, using a non-silicon, spray gun lubricant:

Step 1. Put two or three drops of lubricant on the NEEDLE (#24), in front of the TRIGGER (#14). Tip the gun backward and allow the lubricant to drip into the front of the GUN HOUSING (#13).

Step 2. Put two or three drops of lubricant on the VOLUME ADJUSTING SCREW (#12). Tip the gun sideways and allow the lubricant to drip into the SPRAYER HOUSING.

Step 3. Put two or three drops of lubricant on the FAN ADJUSTING SCREW (#28). Tip the gun forward and allow the lubricant to drip into the back of the HOUSING (#13).

Step 4. Put one drop of lubricant on the inside of the TRIGGER SCREW (#15). Work the TRIGGER (#14) to allow the lubricant to coat the parts.

Figure 6 -- Lubricating the Touch-Up Gun

SKU 00086

For technical questions, please call 1-800-444-3353.

Page 10