Harbor Freight Tools 86 operating instructions Adjusting Jet Shape, Adjusting Paint Output

Page 6

The fan size is adjusted by turning the FAN ADJUSTING SCREW (#28) clockwise for a narrow spray and counterclockwise for a wider spray.

Adjusting Jet Shape

The Jet Shape is adjusted by turning the AIR CAP (#1). It should be perpendicular to the ground to create a horizontal jet and parallel to the ground to create a vertical jet.

Adjusting Paint Output

The Volume Output is adjusted by turning the VOLUME ADJUSTMENT SCREW (#12) clockwise to reduce the output and counterclockwise to increase the output.

SKU 00086

For technical questions, please call 1-800-444-3353.

Page 6

Image 6

Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsSave this Manual SpecificationsSafety Warnings & Cautions For technical questions, please callUnpacking Assembly Before YOU USE Your TOUCH-UP GUNOperation SetupAdjusting Fan Size Filling the Paint GunAdjusting Jet Shape Adjusting Paint OutputSpraying Techniques Distance from wallMaintenance General Maintenance  Checking & Replacing the NeedleCleaning Lubrication Lubricating the Touch-Up GunPreventative Maintenance SKU For technical questions, please callParts List Description QTYMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800 Record Product’s Serial Number Here