SAW OPERATIONS
Getting Started
Please take the time to familiarize yourself with the controls of your new saw. Below are listed the names of controls and fea- tures found on the saw and an explanation of their function. Please refer to Fig. 3, 4 &
5.
Fig 3. Top view.
From Figure 3:
Blade Lock: Used to lock blade when installing or removing blades.
Saw Base Lock Knob: Used when adjusting base height / depth of cut.
Angle Lock Knob: Used when changing angle of cut.
Edge Guide Lock Screw: Used with edge guide, locks edge guide to pre- determined distance from blade.
Dust Port: The 17⁄16" port helps to clear chips from workpiece.
Guide Notch: Provides a visual guide for following a line through a cut.
H0603 18V Cordless Drill and Saw |