Harbor Freight Tools 93632 operating instructions Tool USE and Care

Page 3

6.Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

7.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

8.Do not abuse the Power Cord. Never use the Power Cord to carry the tool or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges,or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock.

9.When operating a power tool outside, use an outdoor extension cord marked“W-A”or“W”. These extension cords are rated for outdoor use, and reduce the risk of electric shock.

10.Stay alert. Watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

11.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

12.Avoid accidental starting. Be sure the Power Switch is off before plugging in.Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents.

13.Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

14.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.

15.Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

TOOL USE AND CARE

16.Use clamps (not included) or other practical ways to secure and support the work piece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

17.Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

18.Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced.

19.Disconnect the Power Cord Plug from the power source before making any adjustments,changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

20.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

21.Maintain tools with care. Keep cutting tools maintained and clean. Properly maintained tools are less likely to bind and are easier to control. Do not use a damaged tool.Tag damaged tools “Do not use” until repaired.

22.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

23.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

English

SKU 93632 For technical questions, please call 1-800-444-3353.

Page 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Heavy-duty Low Speed VSR Drill Assembly and Operating InstructionsWork Area SpecificationsGeneral Safety Rules Electrical SafetyTool USE and Care Specific Safety Rules ServiceGrounded Tools Tools with Three Prong Plugs GroundingExtension Cords Double Insulated Tools Tools with TWO Prong PlugsUnpacking SymbologyPower Switch Features Operating InstructionsAbout Low Speed Heavy-duty Drills Maintenance and Inspection Using the Heavy Duty DrillReversing Direction of the Drill Parts List TroubleshootingPlease Read the Following Carefully Assembly DrawingAssemblage ET Mode DE Fonctionnement Région DE Travail SpécificationsSauvez CE Manuel Règles Répandues DE SécuritéUtilisation D’INSTRUMENT ET Soin Règles DE Sécurité Spécifiques EntretienPage Avertissement Installer À LA TerreCordons D’EXTENSION Voir le Diagramme C, la page suivanteLE Fait DE Faire Marcher DES Instructions DéfaisantCaractéristiques d’Interrupteur de Pouvoir De la Faible vitesse Foreuses Très résistantesMaintenance ET Inspection ’Inversion de la Direction de la Foreuse’utilisation de la Foreuse Très résistante Liste DE Parties LE Fait DE Fixer DES ProblèmesLisez S’IL Vous Plaît LE Suivant Soigneusement Dessin DE Montage

93632 specifications

Harbor Freight Tools 93632 is a versatile 1-inch reciprocating saw that stands out in the realm of power tools, particularly for both DIY enthusiasts and professionals. Known for its impressive performance and user-friendly design, the 93632 model combines high-quality engineering with affordability, making it a popular choice among tradespeople and hobbyists alike.

One of the most notable features of the Harbor Freight Tools 93632 is its powerful motor, which delivers a robust performance capable of cutting through a variety of materials with ease. The saw operates with a variable speed control that allows users to adjust the speed according to the task at hand, enabling more precision and control while cutting through wood, metal, and plastic.

The 93632 is engineered with a tool-free blade changing mechanism, which simplifies the process of swapping out blades. This feature saves time and enhances productivity, allowing users to quickly switch from one blade to another based on their cutting needs. This model is also compatible with a variety of saw blades, providing versatility for different applications ranging from demolition to detailed work.

In terms of design, the 93632 is lightweight and ergonomically crafted, ensuring comfort during extended use. Its compact size makes it easy to maneuver in tight spaces, while the rubberized grip offers stability and reduces user fatigue. Additionally, the saw has a robust construction that enhances durability, catering to both indoor and outdoor projects.

Safety is also a key consideration in the design of the Harbor Freight Tools 93632. The model incorporates safety features such as a blade guard that protects users from accidental cuts and a safety lock mechanism that prevents unintentional starts. These attributes make it a reliable option for both seasoned professionals and inexperienced users.

Another appealing aspect of the Harbor Freight Tools 93632 is its price point. Harbor Freight Tools is known for providing quality tools at budget-friendly prices, making the 93632 an affordable investment without compromising on performance. With its combination of power, versatility, and safety features, the Harbor Freight Tools 93632 reciprocating saw is an excellent addition to any toolbox, ready to tackle a wide range of cutting tasks.
Top Page Image Contents