Harbor Freight Tools 93632 Maintenance and Inspection, Reversing Direction of the Drill

Page 9

2.Squeeze the Power Switch.The tool will start to operate. The speed of the drill will increase as the Trigger is squeezed tighter. The speed will lessen as the Trigger is released.

3.Stop the tool by releasing the Power Switch.

Note: The Forward/Reverse button is located behind the Trigger (46). When button is pushed in on the left side of housing (see photo on cover), the drill will rotate in Reverse (counterclockwise). When button is pushed in on the right side of housing, the drill will rotate in a Forward clockwise direction.

Reversing Direction of the Drill

Caution: Never attempt to change direction of the drill while the drill is operating. Always wait for the drill to come to a complete stop before changing direction.

1.Most drill bits are designed to work while turning in a clockwise direction. When drilling, confirm that you are using a standard type drill bit and that the drill is set to turn in the correct direction.

2.Occasionally the drill bit may become stuck, or it is desired to reverse drill direction.

3.To reverse direction, wait for the drill to come to a complete stop. Press the Forward/Reverse button as described in the Note above.

Using the Heavy Duty Drill

Before using the Heavy Duty Drill, be sure all work area safety precautions are being observed. Be sure to wear ANSI-approved eye protection.

NOTE: The motor will heat up as it is used.To avoid motor burn out, do not use continually for more than 20 minutes at a time. Allow the tool to cool down for at least 10 minutes before resuming work.

1.Place the drill tip on the work piece, and Start the tool.

2.Apply light pressure on the tool to help it drill into the workpiece. Do not overload the tool. If the speed noticeably slows down, release some downward pressure from the drill.

3.When the hole has been drilled, remove the bit from the hole and release pressure from the Trigger, allowing the tool to stop operating.

4.Unplug the tool and store it in a safe place.

MAINTENANCE AND INSPECTION

1.The Armature (25) and Stator (29) comprise the main part of the tool. Protect these electrical components from moisture or oil intrusion.

2.Inspect the Carbon Brushes (34) regularly. Replace them is they are more than 1/3 worn or are chipped or cracked.When handling them, be careful not to damage them. To reduce wear after inspection, replace them in exactly the same way as they were removed.

3.Regularly inspect all components and fasteners to be sure they are properly installed, not damaged, and tight. Tighten any loose parts. Repair or replace any damaged components.

4.If the tool is damaged or does not function properly, take it to a qualified service technician.

5.Clean the tool after each use, and store it properly. Keep it out of reach of children and other unauthorized persons. Protect it from moisture and corrosive materials.

English

SKU 93632 For technical questions, please call 1-800-444-3353.

Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Heavy-duty Low Speed VSR Drill Assembly and Operating InstructionsGeneral Safety Rules SpecificationsElectrical Safety Work AreaTool USE and Care Specific Safety Rules ServiceGrounded Tools Tools with Three Prong Plugs GroundingExtension Cords Double Insulated Tools Tools with TWO Prong PlugsUnpacking SymbologyPower Switch Features Operating InstructionsAbout Low Speed Heavy-duty Drills Maintenance and Inspection Using the Heavy Duty DrillReversing Direction of the Drill Parts List TroubleshootingPlease Read the Following Carefully Assembly DrawingAssemblage ET Mode DE Fonctionnement Sauvez CE Manuel SpécificationsRègles Répandues DE Sécurité Région DE TravailUtilisation D’INSTRUMENT ET Soin Règles DE Sécurité Spécifiques EntretienPage Avertissement Installer À LA TerreCordons D’EXTENSION Voir le Diagramme C, la page suivanteLE Fait DE Faire Marcher DES Instructions DéfaisantCaractéristiques d’Interrupteur de Pouvoir De la Faible vitesse Foreuses Très résistantesMaintenance ET Inspection ’Inversion de la Direction de la Foreuse’utilisation de la Foreuse Très résistante Liste DE Parties LE Fait DE Fixer DES ProblèmesLisez S’IL Vous Plaît LE Suivant Soigneusement Dessin DE Montage

93632 specifications

Harbor Freight Tools 93632 is a versatile 1-inch reciprocating saw that stands out in the realm of power tools, particularly for both DIY enthusiasts and professionals. Known for its impressive performance and user-friendly design, the 93632 model combines high-quality engineering with affordability, making it a popular choice among tradespeople and hobbyists alike.

One of the most notable features of the Harbor Freight Tools 93632 is its powerful motor, which delivers a robust performance capable of cutting through a variety of materials with ease. The saw operates with a variable speed control that allows users to adjust the speed according to the task at hand, enabling more precision and control while cutting through wood, metal, and plastic.

The 93632 is engineered with a tool-free blade changing mechanism, which simplifies the process of swapping out blades. This feature saves time and enhances productivity, allowing users to quickly switch from one blade to another based on their cutting needs. This model is also compatible with a variety of saw blades, providing versatility for different applications ranging from demolition to detailed work.

In terms of design, the 93632 is lightweight and ergonomically crafted, ensuring comfort during extended use. Its compact size makes it easy to maneuver in tight spaces, while the rubberized grip offers stability and reduces user fatigue. Additionally, the saw has a robust construction that enhances durability, catering to both indoor and outdoor projects.

Safety is also a key consideration in the design of the Harbor Freight Tools 93632. The model incorporates safety features such as a blade guard that protects users from accidental cuts and a safety lock mechanism that prevents unintentional starts. These attributes make it a reliable option for both seasoned professionals and inexperienced users.

Another appealing aspect of the Harbor Freight Tools 93632 is its price point. Harbor Freight Tools is known for providing quality tools at budget-friendly prices, making the 93632 an affordable investment without compromising on performance. With its combination of power, versatility, and safety features, the Harbor Freight Tools 93632 reciprocating saw is an excellent addition to any toolbox, ready to tackle a wide range of cutting tasks.
Top Page Image Contents